{"id":33200,"date":"2026-07-29T08:24:52","date_gmt":"2026-07-29T08:24:52","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=33200"},"modified":"2026-07-29T08:34:36","modified_gmt":"2026-07-29T08:34:36","slug":"internal-corner-radius-in-cnc-machining","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/de\/internal-corner-radius-in-cnc-machining\/","title":{"rendered":"Internal Corner Radius in CNC Machining: Design Guidelines, Cost &#038; Best Practices"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"33200\" class=\"elementor elementor-33200\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-df897ef e-flex e-con-boxed e-con e-parent\" data-id=\"df897ef\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4ae0334 elementor-widget elementor-widget-text-editor\" data-id=\"4ae0334\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>A designer puts a sharp 90\u00b0 corner on an internal pocket. It looks correct on the drawing, but once the part reaches the machine shop, a problem appears. A standard end mill cannot produce a perfectly sharp internal corner. The shop must use a smaller cutter, slow down the machining process, or even switch to <a href=\"https:\/\/www.beskamold.com\/de\/edm-dienstleister\/\">Funkenerosion<\/a>, increasing both cost and lead time.<\/p><p>This situation is common in <a href=\"https:\/\/www.beskamold.com\/de\/anbieter-von-cnc-bearbeitungsdienstleistungen\/\">CNC-Bearbeitung<\/a> because cutting tools are round. The internal corner radius you specify determines the tool size that can be used, which directly affects machining efficiency, surface finish, and manufacturing cost.<\/p><p>This article explains what an internal corner radius is, why it matters in CNC machining, and how to choose practical radii that improve manufacturability while controlling production cost. It also covers common design mistakes and drawing best practices.<\/p><h2>1. What Is Internal Corner Radius<\/h2><p>A pocket with sharp corners on a CAD drawing is a warning sign for any machinist. Because a standard end mill is round, it cannot produce a perfectly sharp internal corner during conventional CNC milling.<\/p><p>An internal corner radius is the rounded transition where two walls of a pocket or slot meet after machining. It is the portion of material that a round cutting tool cannot remove. The smaller the radius, the smaller the cutting tool required, which increases machining difficulty, cycle time, and cost.<\/p><p>Internal corner radii should be clearly specified on engineering drawings. Missing or unclear radius callouts often lead to design clarification, quotation delays, or manufacturing changes.<\/p><h2>2. Why It Matters for Machining<\/h2><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/07\/Internal-Corner-Radius-in-CNC-Machining.jpg\" class=\"alignnone size-full wp-image-33208 lazyload\" alt=\"Internal Corner Radius in CNC Machining\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-33208\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/07\/Internal-Corner-Radius-in-CNC-Machining.jpg\" alt=\"Internal Corner Radius in CNC Machining\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/07\/Internal-Corner-Radius-in-CNC-Machining.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/07\/Internal-Corner-Radius-in-CNC-Machining-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/07\/Internal-Corner-Radius-in-CNC-Machining-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/07\/Internal-Corner-Radius-in-CNC-Machining-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/07\/Internal-Corner-Radius-in-CNC-Machining-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>The specified corner radius determines the largest end mill that can be used to machine a feature. Because an end mill is round, it cannot produce a perfectly sharp internal corner. An R1 corner requires a 2 mm end mill, while an R3 corner allows a 6 mm end mill. A larger tool simply cannot fit into a smaller corner.<\/p><p>Tool size directly affects machining efficiency. Smaller end mills remove material more slowly, require lighter cutting parameters, and need additional machining passes. They also wear faster, deflect more easily, and are more likely to break during machining. Larger tools are more rigid, produce better surface finishes, and generally reduce cycle time.<\/p><p>The difference between an R1 and an R3 corner is not just tool size. It influences machining time, tool life, surface quality, and overall production cost. For this reason, the corner radius should be determined during the design stage, before the drawing reaches the machine shop.<\/p><h2>3. How Corner Radius Affects Cost<\/h2><p>Corner radius directly affects machining cost because it determines tool size, cycle time, and tool life. Increasing a very small radius to a moderate one often provides the greatest reduction in manufacturing cost.<\/p><p>Different corner radii require different end mill sizes, which directly influence machining speed, cutting efficiency, and production cost. The table below compares the typical relationship between corner radius, tool size, cycle time, tool life, and overall cost.<\/p><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"true\"><div><table class=\"ace-table\" data-ace-table-col-widths=\"147;186;186;143;143\"><colgroup> <col width=\"147\" \/> <col width=\"186\" \/> <col width=\"186\" \/> <col width=\"143\" \/> <col width=\"143\" \/><\/colgroup><thead><tr><th colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-EhxFdUjHdouITfxPTXrcPqnVnc3\" style=\"text-align: left;\">Corner Radius<\/div><\/th><th style=\"text-align: left;\" colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-Ob5wdGg5toLeF6xIsEncAIMdnoe\">Max Tool Diameter<\/div><\/th><th style=\"text-align: left;\" colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-IHkCdkpLDooX4SxYKfPcqnKSnEK\">Relative Cycle Time<\/div><\/th><th style=\"text-align: left;\" colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-MKcNd64BXoOVjbxRUqecy0DlnZc\">Tool Life<\/div><\/th><th colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-O3h3d3VgRoO9iRxqXpJcUtBtncb\" style=\"text-align: left;\">Cost Impact<\/div><\/th><\/tr><\/thead><tbody><tr><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-Yqe1dO9MVocngBxEUjacGUnNnKd\">R0.5<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-CaLEdtphhoaoovxFXnncygNOnQc\">1 mm<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-L7jldNHQboPka8x5SonczfTsnyd\">Longest<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-Aii4d09SIoFqDxxxegYcuZltnMc\">Shortest<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-RJHPdthuGopKVDxbG1FcEpjLnuf\">H\u00f6chste<\/div><\/td><\/tr><tr><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-KGJbd2DMsofhGUxE4TrcoRxundb\">R1<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-JsFZdtrtAoERIGxIfPmcU4lQnFd\">2 mm<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-L7NfdDi1QoOahxxbR9dcef4JnAf\">Long<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-OXXxds4O6olfCYxXpi2cmdQpncf\">Short<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-ByqHdjQSioFGYJxkFwLcilfjn9b\">Hoch<\/div><\/td><\/tr><tr><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-OYjpddechoqUyoxvqV2cgJISntg\">R2<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-OjYPdSruooCmEGxBR1zcq3i4nkg\">4 mm<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-HejPdT8kYoWof7xGc1ncPnJznnb\">Medium<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-G8cId0PixodJWpxllgyce5Obn5b\">Medium<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-VXjwdU1J0oi8C2x9gl9cub2Xnvf\">Medium<\/div><\/td><\/tr><tr><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-IRJzdKmc2odvTExjOYvcaGH8nES\">R3<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-Y4qkdTJ91oyjTWx9lvHcPtJanLf\">6 mm<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-IW40dp20woXgI3xfFQfcjs0pnyf\">Short<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-STtpd7FmToMLDExkIwEcsYrLnCg\">Long<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-ZZpddDOp8of2Egxl0jCc4HINntf\">Niedrig<\/div><\/td><\/tr><tr><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-HiMedvukroz4xWxmWeTczjYHnxc\">R5<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-DqpjdOMeBouz5CxEQ76cYOHFnfs\">10 mm<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-LCUDdkJQkoyWx0xbBNyc9uo7nEd\">Shortest<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-KgAVdNQnuoZdV7xwOlIcZaZ9nVb\">Longest<\/div><\/td><td colspan=\"1\" rowspan=\"1\"><div class=\"ace-line ace-line old-record-id-WpJcdb2SfodcjwxKbaTc05Xbnxg\">Lowest<\/div><\/td><\/tr><\/tbody><\/table><p>R0.5 and R1 generally result in the highest machining cost because they require smaller tools, slower cutting speeds, and more frequent tool changes. R3 and larger radii usually provide a better balance between machining efficiency and tool life. When part geometry permits, specifying a larger radius is generally the more economical choice.<\/p><p>Sources: Industry machining practice guides; tooling manufacturer data.<\/p><p>Note: Values shown are typical industry ranges. Actual cycle time and tool life vary depending on material, machine rigidity, cutting parameters, and machining strategy.<\/p><h5>Corner Relief: A Better Alternative to Small Internal Radii<\/h5><p>When a sharp internal corner is required for assembly, simply reducing the corner radius often increases machining cost. Corner relief provides a practical alternative by adding a small clearance feature at the corner, allowing the rest of the pocket to be machined with a larger standard end mill.<\/p><p>Dog bone and T-bone are the two most common corner relief designs. Dog bone relief is suitable for most mating components, while T-bone relief is often preferred for thin-wall features or edge locations.<\/p><p>Corner relief is not appropriate for every application. The added clearance may be visible on the finished part, so it is generally avoided on sealing surfaces or cosmetic features. For structural components, however, it often reduces tooling cost and cycle time without affecting assembly.<\/p><h2>4. Design Guidelines for Internal Corner Radius<\/h2><p>Choosing an appropriate internal corner radius is a design decision that affects manufacturability, machining efficiency, and production cost. The following guidelines can help reduce unnecessary machining challenges while maintaining part functionality.<\/p><h5>Start with the Largest Radius the Part Allows<\/h5><p>Use the largest internal corner radius that the design permits. For most CNC-machined parts, R3 is a practical starting point because it accommodates a standard 6 mm end mill commonly found in machine shops. If space allows, R5 is even more efficient because larger tools remove material faster and generally last longer.<\/p><p>Avoid R0.5 and R1 unless they are functionally required. These small radii require small-diameter end mills, which are less rigid, wear more quickly, and significantly increase machining time.<\/p><p>Standardize corner radii throughout the part whenever possible. Using multiple radius values often requires additional tool changes or forces the machinist to use the smallest cutter for every corner. A consistent radius simplifies programming, reduces setup time, and improves machining efficiency.<\/p><h5>Match the Radius to Feature Depth and Material<\/h5><p>Corner radius should be considered together with pocket depth. Deep features require larger cutting tools to maintain rigidity. As a general guideline, when feature depth exceeds approximately four times the tool diameter, tool deflection becomes more likely. Increasing the corner radius allows a larger end mill and improves machining stability.<\/p><p>Material also influences radius selection. Aluminum can usually be machined successfully with relatively small radii. Stainless steel and titanium generate more heat and place greater loads on the cutting tool, making R3 or larger a more practical starting point. Hardened steels often require even larger radii or alternative machining processes such as EDM.<\/p><h5>Consider Surface Requirements and Manufacturing Capability<\/h5><p>Critical functional surfaces deserve special attention. Sealing faces, mating surfaces, and highly stressed areas generally benefit from larger corner radii because larger tools produce better surface finishes with less vibration and chatter.<\/p><p>Whenever possible, match the specified radius to the tooling commonly used by the machine shop. Standard tool sizes vary between manufacturers, and designing around readily available cutters often reduces machining time and tooling cost. If a corner is functionally critical, identify it clearly on the drawing or confirm the preferred machining approach with the supplier during the DFM review.<\/p><h2>5. How to Specify Corner Radius on Drawings<\/h2><p>Clear radius callouts eliminate ambiguity and allow the machine shop to quote and manufacture the part without unnecessary clarification. Critical radii should always be identified directly on the engineering drawing.<\/p><h5>Where to Put the Callout<\/h5><p>Place the radius callout directly on the relevant corner using a leader line. Specify the radius value, such as R3 or R0.5, next to the leader. Radius requirements should not rely solely on general tolerance notes.<\/p><p>If most internal corners use the same radius, add a general note such as &#8220;All internal corners R3 unless otherwise noted.&#8221; Any exceptions should be called out individually.<\/p><h5>What the Callout Means<\/h5><p>A standard callout such as R3 specifies a 3 mm radius. R3 MAX defines the maximum allowable radius, while R3 MIN specifies the minimum acceptable radius. When the radius is critical to part function or assembly, include a functional note, for example: R3 MIN, clearance for mating part.<\/p><h5>Identify Critical Corners<\/h5><p>Not every internal corner has the same functional importance. Clearly identify whether a corner is functional, cosmetic, or intended only for clearance so the machinist understands which features must be maintained. Notes such as &#8220;R3 MIN, functional radius. Do not reduce.&#8221; help avoid unnecessary assumptions during manufacturing.<\/p><p>Clear radius callouts improve quotation accuracy, reduce design clarification, and help machining begin without unnecessary delays. They also reduce the risk of rework caused by drawing interpretation.<\/p><h2>6. Common Mistakes<\/h2><p>Two misconceptions appear frequently in CNC part design. One is assuming that any small corner radius is sufficient. The other is believing that a larger radius always wastes valuable space.<\/p><h5>Mistake 1: Assuming Any Small Radius Is Good Enough<\/h5><p>An R0.5 corner is easier to machine than a perfectly sharp corner, but it still requires a very small end mill. Small tools remove material more slowly, wear more quickly, and increase machining cost. The greatest improvement usually comes when the radius is large enough to accommodate a standard cutter, with R3 often providing a practical balance between machining efficiency and cost.<\/p><h5>Mistake 2: Assuming a Larger Radius Wastes Space<\/h5><p>A larger corner radius does occupy slightly more space, but in most pockets and cavities it has little effect on part function. In many cases, the reduction in machining time and tooling cost outweighs the small loss of internal volume. When space is limited, it is usually better to optimize other dimensions before reducing the corner radius.<\/p><p>Most internal corner radius problems originate during the design stage rather than during machining. A quick DFM review of tool access and minimum radius requirements usually prevents unnecessary cost and production delays. Although CNC machines can produce very small radii, the most manufacturable solution is not always the smallest one.<\/p><h2>7. How to Discuss Radius Requirements with Suppliers<\/h2><p>Radius requirements are easier to resolve during the design stage than after a drawing has been released for quotation. Discussing tooling capabilities with the supplier early helps avoid unnecessary design revisions, delays, and additional manufacturing cost.<\/p><h5>Ask About Standard Tool Sizes<\/h5><p>Ask which end mill sizes the supplier commonly uses for production. Designing around standard tooling often reduces machining time, tooling cost, and setup complexity.<\/p><h5>Ask About Machining Limits<\/h5><p>Ask what minimum internal corner radius can be produced with standard tooling. Staying above this limit usually avoids special cutters, slower machining, or alternative processes.<\/p><h5>Discuss Deep Features<\/h5><p>Deep pockets often require longer cutting tools and different machining strategies. Confirm whether the specified radius is practical for the feature depth before finalizing the design.<\/p><h5>Review Alternative Solutions<\/h5><p>If the specified radius cannot be machined efficiently, consider increasing the radius, modifying the feature geometry, or accepting the additional cost of special tooling or longer machining time. These decisions are best made during the DFM review rather than after the drawing has been released.<\/p><h5>Consider Production Volume<\/h5><p>The most economical radius often depends on production volume. A small radius may be acceptable for prototypes or low-volume parts, while larger production runs usually benefit from radii that allow standard tooling. Comparing quotations for alternative radius values can help determine whether a design change will reduce overall manufacturing cost.<\/p><h2>Abschluss<\/h2><p>The best practice for internal corner radius is straightforward: specify the largest radius that the part&#8217;s geometry and functional requirements allow. Larger radii generally support larger cutting tools, improve machining efficiency, extend tool life, and reduce manufacturing cost. Smaller radii should be reserved for features where they are genuinely required.<\/p><p>Selecting an appropriate corner radius during the design stage improves manufacturability and helps avoid unnecessary machining challenges later in production. A simple design decision can have a significant impact on machining efficiency, lead time, and overall project cost.<\/p><p>At Beska, internal corner radii are reviewed as part of every DFM evaluation. Our engineers identify features that may increase machining difficulty or cost and provide practical recommendations before production begins. If you are designing a CNC-machined component, send us your drawing for a manufacturability review or a quotation.<\/p><h2>H\u00e4ufig gestellte Fragen<\/h2><\/div><\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-bb89495 e-flex e-con-boxed e-con e-parent\" data-id=\"bb89495\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-7221949 uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"7221949\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-119' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-230a0f3\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-230a0f3 uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">What is the smallest internal corner radius that can be machined?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-GnBgdKDgVorCKXxS9fpcxn7Cneh\">There is no universal minimum internal corner radius. The practical limit depends on the cutting tool, workpiece material, feature depth, and machine capability. Although R0.5 can be machined, R1 or larger is generally a more economical choice for most CNC milling applications.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-6788ad7\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-6788ad7 uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">What is a good internal corner radius for CNC machining?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-IRQ4dtkldok1qhxFYiKcL728nIh\">There is no single radius suitable for every part, but R3 is a practical starting point for many CNC-machined components because it accommodates a standard 6 mm end mill. When possible, specify the largest radius that the design allows to improve machining efficiency and reduce manufacturing cost.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-a8900c9\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-a8900c9 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">Does increasing the corner radius reduce machining cost?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-CoY3dmaNboFMtUx7t9CcoLvxnPe\">In most cases, yes. A larger radius allows the use of larger cutting tools, which remove material more efficiently, improve tool life, and reduce machining time. The cost benefit depends on the part geometry, material, and production volume.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-f304ac6\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-f304ac6 uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">Does material type affect the recommended corner radius?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-IjTyd0moMoZdONxAii9cTw4SnWb\">Material does not change the geometric relationship between the cutting tool and the corner radius, but it does affect machining efficiency. Harder materials increase tool wear, making small radii more expensive for machines. As material hardness increases, larger corner radii generally become more economical.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-bf77b3d\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-bf77b3d uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">Can a perfectly sharp internal corner be machined?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-MsMUdSPkgoY7gxxFcP4chEnIn1e\">Not by conventional CNC milling. Because end mills are round, they always leave an internal corner radius. When a nearly sharp internal corner is required, manufacturers may use EDM or redesign the feature with corner relief, depending on the application.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-1350dcc\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-1350dcc uael-question-span\" tabindex=\"0\" id=\"uael-faq-6\">Can the internal corner radius be changed during DFM?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-GaeydChTaoJJspxow0fclzWvns4\">Yes. Internal corner radii are commonly reviewed during the DFM process. If a specified radius requires special tooling or significantly increases machining cost, manufacturers often recommend a larger radius while ensuring that the change does not affect part function or assembly.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>A designer puts a sharp 90\u00b0 corner on an internal pocket. It looks correct on the drawing, but once the part reaches the machine shop, a problem appears. A standard end mill cannot produce a perfectly sharp internal corner. The shop must use a smaller cutter, slow down the machining process, or even switch to [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":33217,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-33200","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/posts\/33200","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/comments?post=33200"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/posts\/33200\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/media\/33217"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/media?parent=33200"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/categories?post=33200"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/de\/wp-json\/wp\/v2\/tags?post=33200"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}