{"id":33413,"date":"2026-08-12T03:19:08","date_gmt":"2026-08-12T03:19:08","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=33413"},"modified":"2026-08-12T03:22:00","modified_gmt":"2026-08-12T03:22:00","slug":"precision-optical-component-manufacturing","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/es\/precision-optical-component-manufacturing\/","title":{"rendered":"Precision Optical Component Manufacturing: CNC &#038; DFM Guide"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"33413\" class=\"elementor elementor-33413\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f9c8f78 e-flex e-con-boxed e-con e-parent\" data-id=\"f9c8f78\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-86ea34c elementor-widget elementor-widget-text-editor\" data-id=\"86ea34c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>Precision optical systems depend not only on lenses, mirrors, and sensors, but also on the mechanical components that hold them in position. Lens barrels, optical mounts, alignment plates, and equipment housings must maintain accurate geometry and stable interfaces so that optical alignment is not compromised during assembly or operation.<\/p><p>Manufacturing these components introduces challenges that are less critical in general mechanical parts. Tight concentricity and flatness requirements, thin-wall deformation, thermal expansion, surface treatment, and coating thickness can all affect the final position and stability of optical elements. These factors need to be considered together with CNC machinability when the part is designed.<\/p><p>This article focuses on the precision machined optomechanical components used to support, position, and protect optical elements, rather than the manufacture of lenses or other optical elements themselves. It covers common component types, materials, <a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-mecanizado-cnc\/\">Mecanizado CNC<\/a> processes, manufacturing risks, and DFM considerations for prototype and production projects.<\/p><h2>1. Common Precision Mechanical Components in Optical Equipment<\/h2><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Mechanical-Components-in-Optical-Equipment.jpg\" class=\"alignnone size-full wp-image-33418 lazyload\" alt=\"Common Precision Mechanical Components in Optical Equipment\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-33418\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Mechanical-Components-in-Optical-Equipment.jpg\" alt=\"Common Precision Mechanical Components in Optical Equipment\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Mechanical-Components-in-Optical-Equipment.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Mechanical-Components-in-Optical-Equipment-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Mechanical-Components-in-Optical-Equipment-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Mechanical-Components-in-Optical-Equipment-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Mechanical-Components-in-Optical-Equipment-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>Optomechanical systems use several types of precision-machined components to position, support, and protect optical elements. Manufacturing priorities vary depending on the function of each component and its relationship with the surrounding optical assembly.<\/p><h5>Lens Barrels<\/h5><p>Lens barrels position and retain lenses within optical assemblies. Bore concentricity, lens-seat geometry, shoulder flatness, and assembly clearance are common manufacturing considerations because errors in these features can affect lens positioning and optical alignment.<\/p><p>Machining must also account for how the lens is retained. Excessive interference or uneven contact at the lens seat can introduce mechanical stress during assembly, while excessive clearance can reduce positioning repeatability.<\/p><h5>Optical and Mirror Mounts<\/h5><p>Optical mounts support lenses, filters, mirrors, and other optical elements while maintaining their position within the assembly. Parallelism, perpendicularity, and positional relationships between mounting faces, bores, and locating features often require close control.<\/p><p>Lightweight mounts may also contain thin walls or pockets. These features reduce mass but increase the risk of machining distortion, making fixturing and machining sequence important considerations.<\/p><h5>Camera and Laser Module Housings<\/h5><p>Camera and laser housings combine protective enclosure functions with precision mounting and locating features. Critical areas may include internal bores, datum surfaces, mounting bosses, and interfaces with sensors or optical assemblies.<br \/>Where stray-light control is required, internal surfaces may also use low-reflectivity finishes or coatings. Dimensional stability can become particularly important when the assembly operates across a wide temperature range.<\/p><h5>Precision Alignment Blocks and Base Plates<\/h5><p>Alignment blocks and base plates establish the relative position of multiple components within an optical system. Flatness of reference surfaces, hole position, parallelism, and datum relationships can directly affect assembly alignment.<\/p><p>For larger plates, residual stress and material removal can also cause distortion during machining, so roughing, stress management, and final machining sequence should be considered when tight geometric tolerances are required.<\/p><h2>2. Machinable Materials for Optical System Hardware<\/h2><p>Material selection for optomechanical components depends on stiffness, weight, thermal expansion, corrosion resistance, and machinability. The appropriate material varies with the component function, required dimensional stability, and operating environment.<\/p><h5>Aluminum Alloys: 6061 and 7075<\/h5><p>6061 aluminum is widely used for lens barrels, housings, mounts, and other optomechanical components because it combines good machinability, moderate strength, low weight, and compatibility with anodizing. Where stray-light control is required, internal surfaces can also receive an appropriate low-reflectivity finish.<\/p><p>7075 aluminum provides higher strength than 6061 and can be useful for lightweight components subjected to higher mechanical loads. Its higher strength and different machining behavior should be considered when selecting cutting parameters and designing thin or heavily machined sections.<\/p><p>Both alloys have relatively high thermal expansion compared with materials such as steel or Invar, which may become important when dimensional stability across temperature changes is critical.<\/p><h5>Stainless Steel and Low-Expansion Alloys<\/h5><p>Stainless steels such as 304 are used where corrosion resistance, strength, and dimensional stability are important. Typical applications include mounting hardware, structural components, and parts exposed to humid or demanding operating environments.<\/p><p>Invar is used in precision assemblies where low thermal expansion is a primary requirement. It can help reduce dimensional changes caused by temperature variation, but its machining characteristics and higher material cost make it more suitable for applications where thermal stability justifies the additional manufacturing difficulty.<\/p><h5>Titanium and Engineering Plastics<\/h5><p>Titanium combines high strength-to-weight ratio with good corrosion resistance, making it suitable for specialized optomechanical components where both weight and mechanical performance matter. Its low thermal conductivity makes machining more demanding, requiring controlled cutting conditions and effective heat management.<\/p><p>Engineering plastics are also useful for specific functions within optical assemblies. PEEK offers good temperature resistance, chemical resistance, and electrical insulation, while POM provides good machinability, low friction, and dimensional consistency for spacers, guides, and other lightly loaded components.<\/p><h2>3. CNC Machining and Manufacturing Processes for Optomechanical Parts<\/h2><p>Optomechanical components often require several machining and finishing processes to control geometry, reference surfaces, and assembly interfaces. The appropriate process depends on part shape and the features that require the highest precision.<\/p><h5>5-Axis CNC Milling and Turning<\/h5><p><a href=\"https:\/\/www.beskamold.com\/es\/servicio-de-mecanizado-cnc-de-5-ejes\/\">5-axis CNC milling<\/a> is useful for complex optical mounts, housings, and alignment components with features located on multiple faces or at different angles. By machining related features in fewer setups, it can reduce repositioning error and simplify control of their geometric relationships.<\/p><p>CNC turning is well suited to rotational components such as lens barrels, sleeves, and cylindrical housings. Bores, shoulders, and external diameters can be machined from common references where concentricity between these features is important.<\/p><p>Thin-wall components may require staged roughing, controlled clamping, and light finishing cuts to reduce machining distortion.<\/p><h5>Precision Surface Grinding<\/h5><p>Surface grinding is used when reference faces require tighter flatness, parallelism, or thickness control than is practical through milling alone. Typical applications include alignment plates, mounting bases, and precision datum surfaces.<\/p><p>Grinding may also be performed after rough machining or heat treatment when critical reference surfaces require additional dimensional correction.<\/p><h5>Acabado de superficies<\/h5><p><a href=\"https:\/\/www.beskamold.com\/es\/servicios-de-acabado-de-superficies\/\">Surface treatments<\/a> are selected according to the material and functional requirements of the component. Black anodizing is commonly used on aluminum optomechanical parts where reduced surface reflectivity and corrosion resistance are required.<\/p><p>Passivation, plating, and other treatments may be specified for corrosion protection, wear resistance, electrical requirements, or environmental compatibility. Where coating thickness affects fits or critical dimensions, it should be included in tolerance and machining allowance calculations.<\/p><h5>Mechanical Assembly<\/h5><p>Some optomechanical projects include multiple machined components that must be assembled while maintaining defined positional relationships. Assembly fixtures, controlled tightening sequences, and appropriate torque control can help reduce fastening-induced deformation and improve assembly repeatability.<\/p><p>Critical interfaces should be inspected before assembly so that dimensional errors are identified before they affect the completed assembly.<\/p><h5>Process Comparison<\/h5><table><colgroup> <col width=\"179\" \/> <col width=\"179\" \/> <col width=\"179\" \/> <col width=\"179\" \/><\/colgroup><tbody><tr><td><strong>Proceso<\/strong><\/td><td><strong>Typical Optomechanical Parts<\/strong><\/td><td><strong>Primary Manufacturing Advantage<\/strong><\/td><td><strong>Key Consideration<\/strong><\/td><\/tr><tr><td>5-Axis CNC Milling<\/td><td>Complex mounts, housings, multi-face alignment parts<\/td><td>Multiple related features machined in fewer setups<\/td><td>Fixturing, thin-wall distortion, tool access<\/td><\/tr><tr><td>Torneado CNC<\/td><td>Lens barrels, sleeves, cylindrical housings<\/td><td>Control of concentric cylindrical features<\/td><td>Bore geometry, wall thickness, clamping<\/td><\/tr><tr><td>Surface Grinding<\/td><td>Base plates, datum surfaces, mounting faces<\/td><td>Flatness, parallelism, and thickness control<\/td><td>Grinding allowance and part stability<\/td><\/tr><tr><td>Acabado de superficies<\/td><td>Housings, mounts, barrels<\/td><td>Surface protection and application-specific surface properties<\/td><td>Coating thickness and critical fits<\/td><\/tr><tr><td>Mechanical Assembly<\/td><td>Multi-part optomechanical structures<\/td><td>Controlled component positioning and fastening<\/td><td>Datum relationships, torque, assembly deformation<\/td><\/tr><\/tbody><\/table><p>The process should follow the features that matter most, whether that is concentricity, flatness, multi-face alignment, surface condition, or assembly accuracy.<\/p><h2>4. Common Manufacturing Challenges in Optomechanical Parts<\/h2><p>Optomechanical parts often combine thin walls, precision datums, temperature-sensitive assemblies, and surface treatments. These requirements create several manufacturing risks that should be considered before machining begins.<\/p><h5>Thin-Wall Distortion<\/h5><p>Optical mounts and housings often use thin-wall structures to reduce weight. During machining, residual stress, cutting forces, heat, and clamping pressure can cause the part to deform. Distortion may become more apparent after the component is removed from the fixture.<\/p><p>For features such as mounting faces, precision bores, and lens seats, even small deformation can change their positional relationship. Staged roughing, balanced material removal, appropriate fixturing, and light finishing cuts can help reduce this risk.<\/p><h5>Surface Condition on Light-Facing Features<\/h5><p>Internal surfaces of lens barrels, camera housings, and other components may be exposed to unwanted light within the optical system. Tool marks, surface texture, and reflectivity on these areas can therefore require more attention than ordinary non-functional surfaces.<\/p><p>Where stray-light control is important, the required surface condition should be defined according to the optical design. Machining strategy, surface texture, blasting, black anodizing, or other low-reflectivity treatments may be used depending on the application.<\/p><h5>Thermal Expansion Mismatch<\/h5><p>Optomechanical assemblies often combine metals, glass, ceramics, and polymers with different coefficients of thermal expansion. As temperature changes, these materials expand and contract at different rates, which can alter clearances, preload, or component position.<\/p><p>This becomes more important in systems exposed to wide temperature ranges or repeated thermal cycling. Material selection, assembly clearance, and interface design should therefore account for the expected operating temperature range.<\/p><h5>Coating Thickness and Assembly Clearance<\/h5><p>Anodizing, plating, and other surface treatments change the final dimensions of treated features. If this added thickness is not considered during design and machining, bores, locating features, threads, and mating surfaces may no longer assemble as intended.<\/p><p>Critical fits should therefore be defined with the final surface treatment in mind. Where necessary, machining dimensions and masking requirements should be adjusted to ensure the finished component meets the required fit after surface treatment.<\/p><h2>5. DFM Guidelines for Optomechanical Parts<\/h2><p>Many manufacturing problems in optomechanical parts can be reduced during the design stage. Wall thickness, tolerance allocation, datum selection, and material choice all affect machining stability, inspection difficulty, and production cost.<\/p><h5>Avoid Unnecessarily Thin and Uneven Sections<\/h5><p>Thin walls and large pockets can reduce part stiffness during machining, making the component more sensitive to cutting forces and clamping pressure. This is especially important for lightweight mounts, housings, and large alignment plates.<\/p><p>Where possible, maintain sufficient material around critical mounting and locating features and avoid abrupt transitions between very thin and thick sections. If thin walls are functionally necessary, the machining sequence and fixturing strategy should be considered before the design is released for production.<\/p><h5>Apply Tight Tolerances Only to Functional Features<\/h5><p>Tight tolerances should be assigned to features that control positioning, alignment, fit, or optical performance rather than applied uniformly across the entire part.<\/p><p>Lens seats, locating bores, datum surfaces, alignment holes, and critical mating interfaces may require tighter geometric or dimensional control. Non-critical exterior surfaces and clearance features can often use standard machining tolerances, reducing machining and inspection time without affecting function.<\/p><h5>Define Practical and Functional Datums<\/h5><p>Datum selection affects machining, inspection, and final assembly. Reference features should be stable, accessible, and directly related to the dimensions or geometric relationships that need to be controlled.<\/p><p>For multi-part optomechanical assemblies, the drawing should establish clear relationships between locating features, mounting surfaces, and other functional interfaces. Where practical, machining and inspection references should follow the same datum structure used to control the part in assembly.<\/p><h5>Match the Material to the Actual Operating Requirements<\/h5><p>Material selection should reflect the mechanical, thermal, environmental, and manufacturing requirements of the component. Aluminum alloys are suitable for many optomechanical structures, while stainless steel, titanium, Invar, or engineering plastics may be appropriate when corrosion resistance, strength, thermal stability, weight, or insulation requirements justify their use.<\/p><p>Specifying a more difficult or expensive material without a functional need increases both raw material and machining cost. Material selection should therefore be based on the conditions the component actually needs to withstand.<\/p><h2>6. Optomechanical Component Case Studies<\/h2><p>The following two examples show how part geometry, machining strategy, and surface treatment requirements can affect the production of precision optomechanical components.<\/p><h5>Multi-Axis Optical Alignment Mount<br \/><img decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-Multi-Axis-Optical-Alignment-Mount.jpg\" class=\"alignnone size-full wp-image-33419 lazyload\" alt=\"Case Study Multi Axis Optical Alignment Mount\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-33419\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-Multi-Axis-Optical-Alignment-Mount.jpg\" alt=\"Case Study Multi Axis Optical Alignment Mount\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-Multi-Axis-Optical-Alignment-Mount.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-Multi-Axis-Optical-Alignment-Mount-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-Multi-Axis-Optical-Alignment-Mount-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-Multi-Axis-Optical-Alignment-Mount-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-Multi-Axis-Optical-Alignment-Mount-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/h5><p>This aluminum alignment mount combines multiple precision mounting surfaces with several thin-wall sections. The main manufacturing concern was maintaining the flatness and positional relationship of these features after machining. As material was removed, the thinner sections became increasingly sensitive to cutting forces and clamping pressure.<\/p><p>To reduce deformation, the machining sequence was adjusted so that most material was removed before the critical surfaces received their final cuts. Fixturing pressure was also controlled during finishing, and critical geometric features were inspected without excessive clamping force that could temporarily distort the part.<\/p><h5>7075 Aluminum Lens Barrel<\/h5><p><img loading=\"lazy\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-7075-Aluminum-Lens-Barrel.jpg\" class=\"alignnone size-full wp-image-33420 lazyload\" alt=\"Case Study 7075 Aluminum Lens Barrel\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-33420\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-7075-Aluminum-Lens-Barrel.jpg\" alt=\"Case Study 7075 Aluminum Lens Barrel\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-7075-Aluminum-Lens-Barrel.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-7075-Aluminum-Lens-Barrel-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-7075-Aluminum-Lens-Barrel-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-7075-Aluminum-Lens-Barrel-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Case-Study-7075-Aluminum-Lens-Barrel-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>This 7075 aluminum lens barrel required close control of the internal bore, locating shoulders, and concentric relationships between cylindrical features. Because of the relatively thin barrel structure, excessive clamping pressure during turning could change the bore geometry and affect the final fit.<\/p><p>Low-pressure fixturing was therefore used during critical turning operations. The specified surface treatment was also considered when determining machining dimensions for mating features, so the final bore and assembly clearances could be checked after finishing rather than relying only on dimensions measured before surface treatment.<\/p><h2>7. Production Risk Mitigation and Process Control<\/h2><p>When optomechanical parts move from prototypes to repeat production, final inspection alone may identify problems too late. Critical dimensions and machining conditions should be checked at the stages where they are most likely to change.<\/p><h5>Inspect Critical Features During Machining<\/h5><p>Critical features such as precision bores, datum surfaces, flat mounting faces, and concentric cylindrical features can be inspected between major machining stages rather than only after the part is completely finished.<\/p><p>For example, checking a critical bore after semi-finishing can reveal dimensional drift before surface treatment or final finishing adds more time and cost to a part that is already out of tolerance. The inspection plan should follow the features that matter to the final assembly rather than applying the same checks to every surface.<\/p><h6>Control Material Removal Between Roughing and Finishing<\/h6><p>Removing large amounts of material can release residual stress and change part geometry, particularly in thin-wall housings, mounts, and large base plates. Critical surfaces should therefore not always be brought directly to final dimensions during the first machining stage.<\/p><p>Leaving controlled finishing allowance after rough machining gives the part an opportunity to stabilize before critical dimensions and reference surfaces receive their final cuts. For repeat production, maintaining the same machining sequence and stock allowance also helps reduce variation between batches.<\/p><h5>Validate the Process Before Increasing Production Volume<\/h5><p>A process that works for one or two prototypes may not produce the same results consistently across a larger batch. Before increasing production volume, a pilot batch can be used to confirm fixturing, machining sequence, cutting parameters, inspection methods, and surface treatment requirements.<\/p><p>If dimensional changes or assembly issues appear during the pilot batch, the process can be adjusted before the full order is released. This is particularly useful for parts with thin walls, tight geometric relationships, or finishing processes that affect final dimensions.<\/p><h2>Conclusi\u00f3n<\/h2><p>Precision optomechanical parts require more than tight machining tolerances. Thin-wall stability, datum relationships, material expansion, surface treatment, and final assembly fits all need to be considered when the part is designed and manufactured. Tight tolerances should be reserved for features that actually control positioning, alignment, and fit.<\/p><p>At Beska, we support the manufacturing of lens barrels, optical mounts, housings, and other precision optomechanical components through CNC milling, CNC turning, surface finishing, inspection, and <a href=\"https:\/\/www.beskamold.com\/es\/mechanical-assembly-service\/\">mechanical assembly<\/a>. If you have an optical hardware project ready for prototyping or production, send us your drawings and requirements for a DFM review and quotation.<\/p><h2>Preguntas frecuentes<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-084aac1 e-flex e-con-boxed e-con e-parent\" data-id=\"084aac1\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-7b6e40c uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"7b6e40c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-129' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-dcc4901\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-dcc4901 uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">What factors have the greatest impact on optomechanical part cost?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-URgXd09EOoDDrjxiDCkcEqRpn4g\">Cost is often driven by tight geometric tolerances, complex geometry, difficult materials, special finishing, and inspection requirements. Flatness, concentricity, and positional tolerances should be tightened only on features where they are functionally required.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-b9e9cd2\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-b9e9cd2 uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">Can engineering plastics replace aluminum in optomechanical components?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-ZHDPds1lYorbJRxqwMCcgM0Dnqc\">They can in some applications. PEEK, POM, and other engineering plastics may be suitable for spacers, guides, insulating components, and lightly loaded parts. For structural mounts or precision locating features, material stiffness, thermal expansion, operating temperature, and dimensional stability should be evaluated before replacing metal.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-d663723\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-d663723 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">How do thin walls affect the machining of optical mounts?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-V0zUde12HoFnZixXHtHcIlS1nwg\">Thin walls are more sensitive to clamping pressure, cutting forces, heat, and residual stress. This can affect flatness and the position of critical features after machining. Appropriate wall thickness, controlled fixturing, staged material removal, and light finishing cuts can help reduce deformation.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-c2fc293\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-c2fc293 uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">Do all surfaces of an optical housing need black anodizing?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-HQLNdDBppoKn4yxptVScpiWqnw1\">No. Black anodizing or other low-reflectivity treatments are typically specified where surface reflectivity or stray-light control matters. Other surfaces may have different requirements based on corrosion resistance, appearance, electrical contact, dimensional fits, or assembly needs.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-8201453\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-8201453 uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">What changes when optomechanical parts move from prototype to production?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-DuikdC3GKo2tWGx8EDqcSj5xnac\">Prototype machining allows more flexibility in fixturing and process adjustment. Repeat production requires greater control of fixtures, machining sequence, inspection points, finishing allowances, and other process variables so that critical dimensions remain consistent across the batch.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>Precision optical systems depend not only on lenses, mirrors, and sensors, but also on the mechanical components that hold them in position. Lens barrels, optical mounts, alignment plates, and equipment housings must maintain accurate geometry and stable interfaces so that optical alignment is not compromised during assembly or operation. Manufacturing these components introduces challenges that [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":33432,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-33413","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/33413","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/comments?post=33413"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/33413\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media\/33432"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media?parent=33413"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/categories?post=33413"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/tags?post=33413"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}