{"id":33437,"date":"2026-08-13T02:32:41","date_gmt":"2026-08-13T02:32:41","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=33437"},"modified":"2026-08-13T02:38:35","modified_gmt":"2026-08-13T02:38:35","slug":"precision-parts-for-automation-equipment","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/es\/precision-parts-for-automation-equipment\/","title":{"rendered":"Precision Parts for Automation Equipment: CNC Machining Guide"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"33437\" class=\"elementor elementor-33437\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-582557d e-flex e-con-boxed e-con e-parent\" data-id=\"582557d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b08701f elementor-widget elementor-widget-text-editor\" data-id=\"b08701f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>Precision parts in automation equipment directly affect movement, alignment, and positioning accuracy. Shafts, mounting plates, sensor brackets, and locating components all rely on controlled dimensions and geometric relationships to function correctly.<\/p><p><a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-mecanizado-cnc\/\">Mecanizado CNC<\/a> is widely used for these components because it supports tight tolerances, complex geometries, and a broad range of engineering materials. The required precision, however, should be determined by the function of each part and its critical features.<\/p><p>This article covers common precision parts for automation equipment, materials, CNC machining processes, manufacturing challenges, and key considerations for reliable production.<\/p><h2>1. What Makes a Precision Part Suitable for Automation Equipment?<\/h2><p>Precision does not mean the same thing for every automation component. A sensor bracket depends on accurate positioning, a drive shaft requires controlled concentricity and runout, while a pneumatic manifold relies on accurate passages and sealing features. The required precision should therefore follow the function of the part.<\/p><p>Three requirements are particularly important:<\/p><ul><li>Dimensional and geometric accuracy: Critical holes, bores, mounting surfaces, and locating features must maintain the relationships required for assembly and operation.<\/li><li>Stability under operating conditions: Parts should maintain their required geometry under expected loads, temperature changes, and vibration.<\/li><li>Repeatability across production batches: Components produced in different batches should maintain consistent critical dimensions so they can be assembled without selective fitting or additional adjustment.<\/li><\/ul><p>Which requirement matters most depends on the part: a mounting plate, drive shaft, and sensor bracket do not need precision in the same places.<\/p><h2>2. Common Precision Components in Automation Equipment<\/h2><p>Automation equipment uses different precision components for structural support, motion transmission, positioning, fitting, and sensing. Each type places different demands on machining and dimensional control.<\/p><h5>Structural Frames, Brackets, and Base Plates<\/h5><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Components-in-Automation-Equipment.jpg\" class=\"alignnone size-full wp-image-33445 lazyload\" alt=\"Common Precision Components in Automation Equipment\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-33445\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Components-in-Automation-Equipment.jpg\" alt=\"Common Precision Components in Automation Equipment\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Components-in-Automation-Equipment.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Components-in-Automation-Equipment-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Components-in-Automation-Equipment-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Components-in-Automation-Equipment-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/Common-Precision-Components-in-Automation-Equipment-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>Frames, brackets, and base plates support actuators, guideways, tooling, and other machine modules. Flatness, hole position, and the relationship between mounting surfaces are often the main manufacturing concerns.<\/p><p>Large or heavily machined plates can also distort as material is removed, making part stability and machining sequence important when critical mounting surfaces must remain aligned.<\/p><h5>Motion and Transmission Components<\/h5><p>Shafts, pulleys, rollers, and couplings transfer rotary motion and torque through automation systems. Concentricity, runout, diameter control, and surface finish are particularly important for features that interface with bearings, seals, or other rotating components.<\/p><p>Long or slender shafts are more sensitive to deflection during machining, while high-precision bearing and mating surfaces may require additional finishing depending on the final tolerance and surface requirement.<\/p><h5>Alignment, Spacing, and Connection Elements<\/h5><p>Locating blocks, spacers, interface plates, and mounting flanges establish the position of connected modules. For these parts, the relationship between locating surfaces and mounting features can matter more than the absolute size of the component.<\/p><p>Parallelism, perpendicularity, and hole position should therefore be assigned according to how the part locates and connects with the surrounding assembly.<\/p><h5>Precision Fit Components<\/h5><p>Bearing seats, bushings, and dowel interfaces rely on controlled fits to locate or support mating components. Bore size, roundness, position, and surface condition can all affect the final fit.<\/p><p>For bearing bores in particular, nominal diameter alone does not define the complete requirement. Bore geometry and surface condition should also match the bearing and assembly requirements.<\/p><h5>Sensor Housings and Mounts<\/h5><p>Sensor housings and mounting brackets position sensors relative to the features they measure or detect. Critical requirements may include mounting hole position, datum surfaces, adjustment features, and dimensional stability.<\/p><p>These parts may also incorporate protective features such as sealing surfaces and cable routing, depending on the operating environment.<\/p><p>A base plate, shaft, locating block, and sensor mount may all be precision parts, but the features that need the closest control are different for each one.<\/p><h2>3. Material Selection for Automation Precision Parts<\/h2><p>Material selection for automation parts depends on the load, motion, operating environment, weight, wear requirements, and manufacturing process of each component. The same automation system may use aluminum for structural parts, steel for transmission components, stainless steel around moisture, and engineering plastics for sliding or insulating features.<\/p><h5>Aluminum Alloys (6061-T6, 7075-T6)<\/h5><p>Aluminum is widely used for automation frames, brackets, housings, mounting plates, and other components where low weight and machinability are important.<\/p><p><a href=\"https:\/\/www.beskamold.com\/es\/aluminum-6061\/\">6061-T6<\/a> offers a practical balance of strength, corrosion resistance, machinability, and cost for general automation components. 7075-T6 provides higher strength where greater load capacity is required without significantly increasing weight.<\/p><p>Thin aluminum walls and heavily machined sections can be sensitive to deformation, so part geometry and fixturing should be considered during design.<\/p><h5>Stainless Steel (303, 304, 316)<\/h5><p>Stainless steel is commonly selected for components exposed to moisture, cleaning agents, or corrosive environments. Typical applications include sensor housings, fittings, valve components, and precision mounting hardware.<\/p><p>303 offers better machinability, while 304 and 316 are more commonly selected where corrosion resistance is the priority. Compared with aluminum, stainless steel generally requires more machining time and greater attention to heat and tool wear.<\/p><h5>Carbon and Alloy Steels (1045, 4140)<\/h5><p>Steel is suitable for shafts, gears, pins, locating components, and other parts that require higher strength, stiffness, or wear resistance.<\/p><p>1045 is commonly used for general mechanical components, while 4140 provides higher strength and can be heat treated for more demanding transmission and load-bearing applications. Critical steel components may also require grinding or other finishing after heat treatment.<\/p><h5>Brass (C360)<\/h5><p>C360 brass combines good machinability with corrosion resistance and electrical conductivity. It is commonly used for fittings, bushings, connectors, and small precision components where these properties are useful.<\/p><p>Its free-machining characteristics also make it suitable for parts with threads, small bores, and detailed turned features.<\/p><h5>Engineering Plastics (POM, Nylon, PEEK, PTFE)<\/h5><p>Engineering plastics are used where low weight, electrical insulation, low friction, or corrosion resistance is more important than high structural stiffness.<\/p><p>POM is commonly used for low-friction and dimensionally stable components, Nylon for wear-resistant mechanical parts, PEEK for higher-temperature applications, and PTFE where very low friction or chemical resistance is required.<\/p><p>Because plastics respond differently to cutting heat and clamping pressure than metals, sharp tools and controlled machining conditions are important for maintaining dimensional stability.<\/p><p>Material selection becomes easier once the main requirement is clear: low weight often points toward aluminum, corrosion resistance toward stainless steel, high load and wear toward steel, and low friction or electrical isolation toward engineering plastics.<\/p><h2>4. CNC Machining Process Selection<\/h2><p>The machining process should follow the geometry and critical features of the part. Some components can be completed primarily by milling or turning, while others require additional finishing operations to achieve the required fit, runout, or surface condition.<\/p><h5>Fresado CNC<\/h5><p><img decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Milling-Processe-for-Automation-Equipment.jpg\" class=\"alignnone wp-image-33446 size-full lazyload\" alt=\"CNC Milling Process for Automation Equipment\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone wp-image-33446 size-full\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Milling-Processe-for-Automation-Equipment.jpg\" alt=\"CNC Milling Process for Automation Equipment\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Milling-Processe-for-Automation-Equipment.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Milling-Processe-for-Automation-Equipment-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Milling-Processe-for-Automation-Equipment-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Milling-Processe-for-Automation-Equipment-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Milling-Processe-for-Automation-Equipment-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p><a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-fresado-cnc\/\">Fresado CNC<\/a> is commonly used for brackets, actuator housings, interface plates, manifolds, and other components with pockets, holes, mounting surfaces, or features on multiple faces.<\/p><p>For parts with complex multi-face geometry, 5-axis machining can reduce the number of setups and help maintain geometric relationships between features that would otherwise require repeated repositioning.<\/p><h5>Torneado CNC<\/h5><p><a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-torneado-cnc\/\">Torneado CNC<\/a> is well suited to shafts, rollers, spindles, bushings, connectors, and other predominantly cylindrical components. It provides efficient control of diameters and concentric relationships between turned features.<\/p><p>Where tighter diameter, runout, or surface finish requirements are needed, critical shaft and bearing surfaces may receive an additional grinding operation after turning or heat treatment.<\/p><p><img loading=\"lazy\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Turning-Process-for-Automation-Equipment.jpg\" class=\"alignnone size-full wp-image-33447 lazyload\" alt=\"CNC Turning Process for Automation Equipment\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-33447\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Turning-Process-for-Automation-Equipment.jpg\" alt=\"CNC Turning Process for Automation Equipment\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Turning-Process-for-Automation-Equipment.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Turning-Process-for-Automation-Equipment-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Turning-Process-for-Automation-Equipment-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Turning-Process-for-Automation-Equipment-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/08\/CNC-Turning-Process-for-Automation-Equipment-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><h5>Precision Grinding<\/h5><p>Grinding is commonly used as a finishing process when turned or milled surfaces require tighter dimensional, geometric, or surface finish control.<\/p><p>Typical applications include bearing journals, precision shafts, locating surfaces, and other features where the final requirement cannot be achieved efficiently through standard turning or milling alone.<\/p><p>Many automation components therefore use more than one process. A shaft may be turned, heat-treated, and ground to its final dimensions, while a housing may be milled first and then bored or reamed for critical bearing fits. For many automation parts, the final process route is determined feature by feature rather than by the overall shape of the component alone.<\/p><h2>5. Surface Finish and Its Effect on Component Performance<\/h2><p>Surface roughness matters most on features that contact, slide, seal, or locate against other components. Bearing seats, sealing faces, and sliding surfaces may therefore require different surface conditions from general machined features.<\/p><p>For many non-critical machined surfaces, Ra 3.2 \u00b5m is commonly used as a general reference. Functional surfaces may require finer roughness depending on the application:<\/p><ol><li>Bearing and mating surfaces: Roughness should match the required fit, contact condition, and bearing specification.<\/li><li>Sealing surfaces: Requirements depend on the seal type, pressure, motion, and mating material.<\/li><li>Sliding surfaces: Load, speed, lubrication, and wear requirements determine the appropriate surface condition.<\/li><li>General non-critical surfaces: Standard machined finishes are usually sufficient unless appearance or another functional requirement dictates otherwise.<\/li><\/ol><p>The required finish also affects the manufacturing process. Fine turning or milling may be sufficient for some functional surfaces, while tighter surface requirements may require grinding, honing, lapping, or another secondary finishing operation.<\/p><p>The required roughness should therefore be specified on the functional surface itself rather than applied uniformly across the entire part.<\/p><h2>6. Manufacturing Challenges and Practical Solutions<\/h2><p>Automation parts often combine tight feature relationships, thin or heavily machined sections, and repeat production requirements. Several manufacturing issues deserve particular attention when these parts move from prototype to batch production.<\/p><h5><a href=\"https:\/\/www.beskamold.com\/es\/what-is-tolerance-stacking\/\">Tolerance Stack-Up<\/a><\/h5><p>Individual dimensions may all fall within tolerance while the assembled relationship between several features still creates alignment or fit problems. This is especially relevant to mounting plates, locating blocks, and components that connect multiple automation modules.<\/p><p>For hole patterns and locating features, GD&amp;T can define the relationship between features more clearly than simply tightening individual coordinate dimensions. Tolerances should also be considered across mating components rather than evaluated on each part independently.<\/p><h5>Machining-Induced Distortion<\/h5><p>Removing large amounts of material can redistribute residual stress and change part geometry, particularly in thin sections, asymmetric components, and large base plates.<\/p><p>Critical parts may be rough machined first with controlled finishing allowance left on important surfaces. After the part has stabilized, final machining can bring datums, mounting faces, and other critical features to their required dimensions. Additional stress-relief steps may be considered where the material and accuracy requirements justify them.<\/p><h5>Tool Wear and Dimensional Drift<\/h5><p>During repeat production, tool wear can gradually change cutting forces, dimensions, and surface condition. A process that produces an acceptable first part may therefore begin to drift as the batch continues.<\/p><p>Tool-life control and in-process inspection are particularly useful for critical dimensions that are sensitive to cutting-edge wear. Inspection frequency can then be set according to the feature, material, and production volume.<\/p><h5>Chip and Heat Control<\/h5><p>Deep holes, manifold passages, and enclosed pockets can make chip evacuation more difficult. Re-cutting trapped chips or excessive heat buildup can affect both tool life and the finished surface.<\/p><p>Tool paths, coolant delivery, cutting parameters, and chip evacuation should therefore be planned around the geometry and material of these features, especially when machining deep or enclosed areas.<\/p><p>For automation parts, these risks become more important as production volume increases, because a small process drift can affect an entire batch rather than a single prototype.<\/p><h2>7. Application Example: Robotic Joint Housing<\/h2><p>A robotic joint housing combines several requirements discussed earlier in this article. The part may include bearing seats, mounting faces, internal pockets, and features located on multiple sides, making CNC milling a practical process for controlling these relationships within a single component.<\/p><p>One of the more important manufacturing considerations is the relationship between the bearing seats. Their bore size, position, and alignment need to be controlled according to the bearing and assembly requirements. Depending on the geometry, machining strategy and fixturing should be planned so that critical bores maintain a consistent relationship through the required machining operations.<\/p><p>The housing may also contain thin sections or large pockets to reduce weight. Removing material from these areas can change part stiffness during machining, so roughing, fixturing, and final finishing need to account for possible deformation before the critical mounting and bearing features are completed.<\/p><h2>8. Beska CNC Machining for Automation Equipment Parts<\/h2><p>For automation components, we pay particular attention to the features that affect how the part fits and functions in the final assembly. On mounting plates and locating parts, this may be the relationship between datum surfaces and hole patterns. On shafts and bearing components, bore size, runout, concentricity, and mating fits usually require closer control. These features are identified during drawing review so that machining and inspection can focus on the dimensions that actually matter.<\/p><p>We support CNC milling and turning for automation parts such as mounting plates, brackets, housings, shafts, bushings, and locating components. For parts with thin walls, large material removal, or tight geometric relationships, the machining sequence and fixturing are considered before production rather than treating every feature with the same process. Critical dimensions can then be verified through CMM and other inspection methods according to the drawing requirements.<\/p><p>This support can continue from the first prototype into repeat production. When a part moves into larger batches, the focus shifts from producing one acceptable part to keeping critical dimensions consistent across the order.<\/p><h2>Conclusi\u00f3n<\/h2><p>Precision in automation equipment is not about applying the tightest tolerance to every feature. A mounting plate, shaft, bearing seat, and sensor bracket each depend on different dimensional and geometric relationships. Material choice, machining process, and inspection should follow those functional requirements.<\/p><p>Beska supports CNC machining for automation components from prototypes to repeat production. If you are developing a mounting plate, housing, shaft, locating part, or other custom automation component, <a href=\"https:\/\/www.beskamold.com\/es\/contactanos\/\">send us your drawings<\/a> or CAD files for a DFM review and quotation.<\/p><h2>Preguntas frecuentes<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-732dbfe e-flex e-con-boxed e-con e-parent\" data-id=\"732dbfe\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b5bc1cc uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"b5bc1cc\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-190' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-7e0768e\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-7e0768e uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">What tolerances can CNC machining achieve for automation parts?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-QBxNd7HwnofffyxrI8DclYr9n8b\">Tolerance depends on the part geometry, material, size, and feature type. Tight tolerances can be applied to critical features such as bearing bores, locating holes, and mating surfaces, while non-critical dimensions can usually use wider tolerances to reduce machining and inspection time.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-6820248\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-6820248 uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">What materials are commonly used for automation brackets and frames?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-BNHpdLwNpotCopxwYMUcQPeTnse\">6061-T6 aluminum is widely used for brackets, frames, mounting plates, and housings because it is lightweight, corrosion-resistant, and easy to machine. Steel or stainless steel may be more suitable when higher strength, wear resistance, or corrosion resistance is required.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-6368a75\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-6368a75 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">What surface finish is required for bearing seats in automation equipment?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-PZ0XdM13koMjgVx9rMNcuO5PnWc\">There is no single roughness value for every bearing seat. The required finish depends on the bearing type, fit, load, and operating conditions, and should be considered together with bore size, roundness, and runout.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-a5fa2d7\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-a5fa2d7 uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">When is 5-axis CNC machining useful for automation components?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>5-axis machining is useful for housings, robotic joint components, manifolds, and other parts with critical features on multiple faces. It can reduce setups and help maintain the geometric relationship between those features, while simpler parts may be more economical to machine with 3-axis equipment.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-1c725c7\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-1c725c7 uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">Can Beska manufacture prototypes and low-volume automation parts?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-NtfLd0Amro9v1AxtixNcVmA4nTg\">Yes. Beska supports CNC machining for automation components from prototypes and small batches to repeat production, including mounting plates, brackets, housings, shafts, bushings, and locating parts. Critical dimensions are inspected according to the drawing and application requirements.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>Precision parts in automation equipment directly affect movement, alignment, and positioning accuracy. Shafts, mounting plates, sensor brackets, and locating components all rely on controlled dimensions and geometric relationships to function correctly. CNC machining is widely used for these components because it supports tight tolerances, complex geometries, and a broad range of engineering materials. The required [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":33456,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-33437","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/33437","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/comments?post=33437"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/33437\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media\/33456"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media?parent=33437"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/categories?post=33437"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/tags?post=33437"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}