{"id":34505,"date":"2026-11-02T02:05:59","date_gmt":"2026-11-02T02:05:59","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=34505"},"modified":"2026-11-02T02:07:35","modified_gmt":"2026-11-02T02:07:35","slug":"feed-rate-vs-cutting-speed","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/es\/feed-rate-vs-cutting-speed\/","title":{"rendered":"Feed Rate vs Cutting Speed: Key Differences in CNC Machining"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"34505\" class=\"elementor elementor-34505\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8a65eb4 e-flex e-con-boxed e-con e-parent\" data-id=\"8a65eb4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-50ec398 elementor-widget elementor-widget-text-editor\" data-id=\"50ec398\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>Cutting speed and feed rate describe two different parts of the cutting process, but they are closely connected. Using the right value for one does not compensate for a poor choice of the other.<\/p><p>Cutting speed describes the relative speed between the cutting edge and the workpiece surface. Feed describes how quickly the tool advances through the cut. In <a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-torneado-cnc\/\">turning<\/a>, feed is commonly expressed per revolution, while <a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-fresado-cnc\/\">molienda<\/a> often uses feed per tooth together with table feed.<\/p><p>Cutting speed has a strong influence on temperature and tool life, while feed has a more direct effect on chip load, cutting forces, surface finish, and productivity. This article explains how the two parameters differ, how they work together, and which one to adjust when machining results begin to change.<\/p><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/Feed-Rate-vs-Cutting-Speed.jpg\" class=\"alignnone size-full wp-image-34507 lazyload\" alt=\"Feed Rate vs Cutting Speed\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-34507\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/Feed-Rate-vs-Cutting-Speed.jpg\" alt=\"Feed Rate vs Cutting Speed\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/Feed-Rate-vs-Cutting-Speed.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/Feed-Rate-vs-Cutting-Speed-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/Feed-Rate-vs-Cutting-Speed-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/Feed-Rate-vs-Cutting-Speed-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/Feed-Rate-vs-Cutting-Speed-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><h2>1. What is Cutting Speed?<\/h2><p>Cutting speed is the relative linear speed between the cutting edge and the workpiece surface. It is commonly expressed in meters per minute (m\/min) or surface feet per minute (SFM).<br \/>Cutting speed is related to spindle speed, but the two are not the same. Spindle speed describes how fast the spindle rotates in revolutions per minute (RPM), while cutting speed describes the surface velocity at the cutting point.<\/p><p>For metric calculations:<br \/>Cutting speed (Vc) = \u03c0 \u00d7 D \u00d7 n \/ 1000<br \/>where:<\/p><ul><li>D = cutting diameter in millimeters<\/li><li>n = spindle speed in RPM<\/li><\/ul><p>The diameter used depends on the machining operation. In milling, it is based on the cutter diameter or effective cutting diameter. In turning, it is based on the workpiece diameter at the cutting point.<\/p><p>For example, a 10 mm end mill running at 8,000 RPM has a cutting speed of approximately 251 m\/min. If the cutter diameter changes, the spindle speed must also change to maintain the same cutting speed.<\/p><p>Cutting speed strongly influences the temperature at the cutting edge and the rate of tool wear, which is why recommended values depend on the workpiece material, tool material, coating, and cutting conditions.<\/p><h2>2. What Is Feed Rate?<\/h2><p>Feed rate describes how quickly the cutting tool advances through the workpiece. Unlike cutting speed, its common expression depends on the machining operation.<\/p><h5>Feed Rate in Turning<\/h5><p>In turning, feed is commonly expressed as millimeters per revolution (mm\/rev). This value represents how far the cutting tool moves along the workpiece during one spindle revolution.<\/p><p>The actual linear travel speed can also be expressed in millimeters per minute (mm\/min):<br \/>Feed rate (mm\/min) = feed per revolution \u00d7 spindle speed<\/p><h5>Feed Rate in Milling<\/h5><p>In milling, feed is usually defined first as feed per tooth (fz), measured in millimeters per tooth. This describes how far the cutter advances as each cutting edge engages the material.<\/p><p>The machine then uses table feed:<br \/>Table feed (vf) = fz \u00d7 n \u00d7 z<br \/>where:<\/p><ul><li>fz = feed per tooth<\/li><li>n = spindle speed in RPM<\/li><li>z = number of effective cutting teeth<\/li><\/ul><p>Feed has a strong influence on chip thickness, cutting forces, productivity, and surface finish. If feed is too low, the tool may rub instead of cutting efficiently. If it is too high, cutting forces and tool load can increase beyond what the tool or setup can support.<\/p><p>The correct feed therefore depends on the machining operation, tool geometry, workpiece material, engagement, and machine rigidity rather than on one universal value.<\/p><h2>3. Cutting Speed vs Feed Rate: Key Differences<\/h2><p>Cutting speed and feed rate describe different parts of the machining process. Cutting speed defines how fast the cutting edge moves relative to the workpiece surface, while feed defines how quickly the tool advances through the cut.<\/p><table><colgroup> <col width=\"260\" \/> <col width=\"260\" \/> <col width=\"260\" \/><\/colgroup><tbody><tr><td><strong>Factor<\/strong><\/td><td><strong>Velocidad de corte<\/strong><\/td><td><strong>Feed Rate<\/strong><\/td><\/tr><tr><td>What It Describes<\/td><td>Relative surface speed between the cutting edge and workpiece<\/td><td>Rate at which the tool advances through the cut<\/td><\/tr><tr><td>Common Units<\/td><td>m\/min or SFM<\/td><td>mm\/rev in turning; mm\/tooth and mm\/min in milling<\/td><\/tr><tr><td>Related Machine Setting<\/td><td>Spindle speed and cutting diameter<\/td><td>Feed per revolution, feed per tooth, and table feed<\/td><\/tr><tr><td>Primary Influence<\/td><td>Cutting temperature and tool life<\/td><td>Chip load, cutting force, surface finish, and productivity<\/td><\/tr><tr><td>If Set Too High<\/td><td>Excessive heat and faster tool wear<\/td><td>Higher cutting forces, heavy chip load, possible tool overload<\/td><\/tr><tr><td>If Set Too Low<\/td><td>Built-up edge or inefficient cutting may occur<\/td><td>Rubbing, poor chip formation, and longer cycle time<\/td><\/tr><\/tbody><\/table><p>The two parameters should not be adjusted independently. A workable combination also depends on tool geometry, workpiece material, depth of cut, engagement, coolant, and setup rigidity.<\/p><h2>4. How Cutting Speed and Feed Work Together<\/h2><p>Cutting speed and feed rate affect the same cutting process, so changing one can alter the conditions under which the other remains effective.<\/p><h5>Cutting Temperature and Chip Load<\/h5><p>Increasing cutting speed generally raises the temperature at the cutting edge and can accelerate tool wear. Increasing feed increases chip thickness and the amount of material removed by each cutting edge.<\/p><p>A stable process requires both values to stay within a range that the tool, material, and machine setup can support.<\/p><h5>Cutting Forces<\/h5><p>Feed has a strong influence on cutting forces because a heavier chip requires more force to remove. Cutting speed also affects forces indirectly through temperature, material behavior, and tool condition.<\/p><p>If the setup lacks rigidity, aggressive speed and feed combinations can increase vibration, deflection, or tool failure even when each value appears reasonable on its own.<\/p><h5>Material Removal Rate<\/h5><p>Productivity depends on more than spindle speed alone. Higher feed, greater depth of cut, and wider tool engagement can all increase material removal rate, while cutting speed determines how fast the cutting edge moves through the material.<\/p><p>For this reason, speed and feed should be optimized together with depth of cut, tool engagement, and machine capability rather than adjusted as independent settings.<\/p><h2>5. How to Choose a Starting Speed and Feed<\/h2><p>A reliable starting point should come from the cutting-tool manufacturer rather than from a universal speed-and-feed table. Recommended values are normally based on a specific tool, workpiece material group, and machining operation.<\/p><h5>Start with the Workpiece Material and Tool<\/h5><p>Material hardness, condition, and machinability influence the recommended cutting speed. Tool material, coating, diameter, insert geometry, and number of cutting edges also affect the usable range.<\/p><p>A carbide end mill for aluminum and a coated insert for stainless steel therefore require very different starting conditions, even if both operations are performed on the same machine.<\/p><h5>Match the Parameters to the Operation<\/h5><p>Turning, milling, drilling, roughing, and finishing place different loads on the cutting edge. Milling parameters also need to account for radial and axial engagement, because a tool making a light finishing pass does not experience the same chip load or heat as one taking a heavy roughing cut.<\/p><p>The manufacturer\u2019s data should therefore be matched to the actual operation rather than applied only by material name.<\/p><h5>Check Machine and Setup Rigidity<\/h5><p>Tool overhang, workholding, spindle condition, part stiffness, and machine power can all reduce the practical speed and feed range.<\/p><p>Thin walls, long tools, or flexible setups may require more conservative parameters even when the tool manufacturer recommends higher values.<\/p><p>Once a stable starting point is established, adjust one parameter at a time while monitoring tool wear, chip formation, surface finish, and dimensional results. This makes it easier to identify which change actually improves the process.<\/p><h2>6. Which Parameter Should You Adjust?<\/h2><p>When a machining problem appears, cutting speed or feed may be part of the cause, but they should not be treated as the only variables. A useful approach is to identify which parameter to check first, then confirm the tool and setup conditions before making a large adjustment.<\/p><table><colgroup> <col width=\"331\" \/> <col width=\"331\" \/> <col width=\"331\" \/><\/colgroup><tbody><tr><td><strong>Machining Problem<\/strong><\/td><td><strong>Check First<\/strong><\/td><td><strong>Also Check<\/strong><\/td><\/tr><tr><td>Rapid tool wear<\/td><td>Cutting speed<\/td><td>Tool grade, coating, coolant, cutting stability<\/td><\/tr><tr><td>Rough surface finish<\/td><td>Feed and tool condition<\/td><td>Built-up edge, chatter, runout, cutting speed<\/td><\/tr><tr><td>Poor chip breaking<\/td><td>Feed \/ chip thickness<\/td><td>Tool geometry, depth of cut, coolant, cutting speed<\/td><\/tr><tr><td>Built-up edge<\/td><td>Cutting speed<\/td><td>Feed, edge sharpness, coolant, workpiece material<\/td><\/tr><tr><td>Excessive cutting force<\/td><td>Feed<\/td><td>Depth of cut, tool geometry, engagement, tool wear<\/td><\/tr><tr><td>Chatter or vibration<\/td><td>Setup rigidity and spindle speed<\/td><td>Tool overhang, depth of cut, feed, workholding<\/td><\/tr><tr><td>Long cycle time<\/td><td>Feed and material removal strategy<\/td><td>Cutting speed, depth of cut, engagement<\/td><\/tr><\/tbody><\/table><p>The table is a starting point rather than a fixed troubleshooting rule. For example, reducing cutting speed may help rapid flank wear, but the real cause could also be an unsuitable tool grade or poor coolant delivery.<\/p><p>Likewise, reducing feed can improve surface finish in some cases, but it will not solve chatter, runout, built-up edge, or a worn cutting edge. The best adjustment depends on the complete cutting condition.<\/p><h2>7. How Speed and Feed Affect Tool Life, Surface Finish, and Productivity<\/h2><p>Cutting speed and feed rate influence machining results in different ways, but their effects often overlap. The goal is to find a combination that delivers the required part quality without sacrificing tool life or cycle efficiency.<\/p><h5>Tool Life<\/h5><p>Cutting speed usually has a strong influence on tool life because higher surface speed increases temperature and wear at the cutting edge.<\/p><p>Feed also affects tool load and wear, particularly when chip thickness or cutting forces become too high. Tool life therefore depends on the complete cutting condition rather than cutting speed alone.<\/p><h5>Acabado de la superficie<\/h5><p>Feed has a direct influence on the tool marks left on the machined surface. Lower feed can improve theoretical surface quality, especially during finishing, but reducing it too far may cause rubbing instead of effective cutting.<\/p><p>Actual surface finish also depends on tool geometry, tool wear, runout, built-up edge, vibration, and cutting speed. A poor finish should therefore not automatically be treated as a feed-rate problem.<\/p><p><img decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/How-Speed-and-Feed-Affect-Tool-Life-Surface-Finish-and-Productivity.jpg\" class=\"alignnone size-full wp-image-34508 lazyload\" alt=\"How Speed and Feed Affect Tool Life, Surface Finish, and Productivity\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-34508\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/How-Speed-and-Feed-Affect-Tool-Life-Surface-Finish-and-Productivity.jpg\" alt=\"How Speed and Feed Affect Tool Life, Surface Finish, and Productivity\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/How-Speed-and-Feed-Affect-Tool-Life-Surface-Finish-and-Productivity.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/How-Speed-and-Feed-Affect-Tool-Life-Surface-Finish-and-Productivity-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/How-Speed-and-Feed-Affect-Tool-Life-Surface-Finish-and-Productivity-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/How-Speed-and-Feed-Affect-Tool-Life-Surface-Finish-and-Productivity-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/How-Speed-and-Feed-Affect-Tool-Life-Surface-Finish-and-Productivity-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><h5>Productivity<\/h5><p>Feed rate, depth of cut, and tool engagement have a major influence on material removal rate and cycle time. Increasing cutting speed may also improve productivity, but it can increase heat and shorten tool life.<\/p><p>For a stable process, productivity improvements should be evaluated against tool wear, surface requirements, machine power, and setup rigidity rather than by increasing speed or feed alone.<\/p><h2>Conclusi\u00f3n<\/h2><p>Cutting speed and feed rate should be treated as a matched set rather than two independent machine settings. The right combination depends on the material, tool, operation, engagement, and setup stability.<\/p><p>For <a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-mecanizado-cnc\/\">CNC machining projects<\/a>, Beska can support process review, parameter optimization, machining, and dimensional inspection from prototype through production.<\/p><h2>Preguntas frecuentes<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-91fbf82 e-flex e-con-boxed e-con e-parent\" data-id=\"91fbf82\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b81ccbc uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"b81ccbc\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-193' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-505ed3c\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-505ed3c uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">Are cutting speed and spindle speed the same thing?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-WLy9dHtE1oCcTxxNeFBcp3RHn5c\">No. Spindle speed is measured in RPM, while cutting speed is the surface velocity between the cutting edge and workpiece. Their relationship depends on the cutting diameter, which is based on cutter diameter in milling and workpiece diameter in turning.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-fe329d7\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-fe329d7 uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">Which parameter should I check first if the surface finish is poor?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-F9yNdvLFUoTCTZxUr91cwhDKn1w\">Feed and tool condition are good places to start. Surface finish can also be affected by tool wear, runout, chatter, built-up edge, and cutting speed.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-caea4c5\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-caea4c5 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">What should I check if tool wear is too fast?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-DLgad3gvSoKg2Fxu3MscUN87nDd\">Cutting speed is usually one of the first parameters to review because it strongly affects cutting temperature and tool life. Tool grade, coating, coolant, stability, and engagement should also be checked.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-861fc30\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-861fc30 uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">When should I use mm\/rev, mm\/tooth, or mm\/min for feed?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>Turning commonly uses mm\/rev, while milling usually uses mm\/tooth to define chip load and mm\/min for table feed. The correct unit depends on the machining operation.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-78206b4\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-78206b4 uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">Can one set of speed and feed values work for all materials?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-Y7Gvd2OXHoM7tDxMugzctUbdnsb\">No. Recommended values depend on the workpiece material, tool, coating, operation, engagement, machine rigidity, and coolant conditions. Tool manufacturer data should be used as the starting point.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>Cutting speed and feed rate describe two different parts of the cutting process, but they are closely connected. Using the right value for one does not compensate for a poor choice of the other. Cutting speed describes the relative speed between the cutting edge and the workpiece surface. Feed describes how quickly the tool advances [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":34517,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-34505","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/34505","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/comments?post=34505"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/34505\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media\/34517"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media?parent=34505"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/categories?post=34505"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/tags?post=34505"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}