{"id":34698,"date":"2026-11-17T02:25:34","date_gmt":"2026-11-17T02:25:34","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=34698"},"modified":"2026-11-17T02:27:54","modified_gmt":"2026-11-17T02:27:54","slug":"large-part-cnc-machining","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/es\/large-part-cnc-machining\/","title":{"rendered":"Large Part CNC Machining: Challenges, Design &#038; Cost"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"34698\" class=\"elementor elementor-34698\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-610b359 e-flex e-con-boxed e-con e-parent\" data-id=\"610b359\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-91e938f elementor-widget elementor-widget-text-editor\" data-id=\"91e938f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>A large part can fit within a CNC machine\u2019s travel and still be difficult to machine accurately. As part size and weight increase, workholding, thermal stability, handling, and inspection begin to influence the machining strategy as much as the cutting process itself.<\/p><p>For engineers and buyers, the key question is no longer just whether a machine can accommodate the part, but whether it can be supported, machined, and inspected reliably.<\/p><p>This guide focuses on the practical decisions that determine whether a large-part machining project is feasible, stable, and cost-effective.<\/p><h2>1. What Is Large Part CNC Machining?<\/h2><p>In practice, large part CNC machining is defined by the limits the workpiece places on the manufacturing process rather than by a fixed size or weight.<\/p><p>The part must fit within the usable machining envelope, stay within table and handling limits, leave enough space for fixturing and tool access, and remain practical to inspect after machining. A machine may have sufficient axis travel for the nominal part size but still be unsuitable once fixture height, tool clearance, loading space, or measurement access is considered.<\/p><p>This is why large-part capability is evaluated around the complete machining setup, not the drawing dimensions alone.<\/p><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/What-Is-Large-Part-CNC-Machining.jpg\" class=\"alignnone size-full wp-image-34707 lazyload\" alt=\"What Is Large Part CNC Machining\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-34707\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/What-Is-Large-Part-CNC-Machining.jpg\" alt=\"What Is Large Part CNC Machining\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/What-Is-Large-Part-CNC-Machining.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/What-Is-Large-Part-CNC-Machining-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/What-Is-Large-Part-CNC-Machining-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/What-Is-Large-Part-CNC-Machining-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/11\/What-Is-Large-Part-CNC-Machining-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><h2>2. Why Large Parts Are More Difficult to Machine<\/h2><p>As part size increases, stiffness, temperature, support, and access have a greater influence on the machining result. Problems that are minor on a small component can become significant across a long span or heavy workpiece.<\/p><h5>Deflection<\/h5><p>Both the machine structure and the workpiece can deflect under cutting forces. Long, thin, or lightly supported sections are especially sensitive, making flatness, straightness, and feature position harder to maintain during machining.<\/p><h5>Thermal Growth<\/h5><p>Temperature changes affect both the machine and the workpiece. On a large component, even a small change in temperature can produce a measurable dimensional change across a long distance.<\/p><p>Long machining cycles also expose the part to machine warm-up, coolant temperature changes, and shifts in ambient temperature.<\/p><h5>Gravity and Workholding<\/h5><p>Large parts may deform under their own weight before cutting begins. Clamping can introduce additional distortion if support points or clamping forces are poorly distributed.<\/p><p>This becomes particularly important for large plates, thin-wall structures, and parts with long unsupported sections.<\/p><h5>Vibration and Tool Reach<\/h5><p>Large components often contain deep features or areas that require longer tool reach. Increasing tool overhang reduces stiffness and raises the risk of vibration and chatter.<\/p><p>Workpiece rigidity, fixture support, tool selection, and cutting conditions all contribute to the stability of the machining system.<\/p><h5>Handling and Repositioning<\/h5><p>Loading, lifting, flipping, and repositioning a large workpiece are part of the machining process. Each repositioning step requires the datum and setup to be established again, which can affect feature relationships between different machining operations.<\/p><p>Handling requirements also influence fixture design, machining sequence, and the type of equipment needed around the machine.<\/p><h2>3. Machine Types and Capacity for Large CNC Parts<\/h2><p>Large-part machining can involve several machine configurations, and the choice is mainly determined by part geometry, weight, machining direction, and access to critical features.<\/p><h5>Gantry and Bridge Mills<\/h5><p>Gantry and bridge mills are commonly used for large plates, frames, molds, and structural components that require a wide machining area. Their long X- and Y-axis travel makes them suitable for parts with features distributed across a large rectangular envelope.<\/p><p>For long or broad components, the main advantage is the ability to reach a large working area without repeatedly repositioning the part.<\/p><h5>Horizontal Boring Mills<\/h5><p>Horizontal boring mills are often used for large housings, machine frames, and components with deep bores or features located on several faces. The horizontal spindle provides better access to internal and side features that may be difficult to reach from a vertical machining position.<\/p><p>This configuration is particularly useful when the workpiece is too heavy or complex to reposition frequently between operations.<\/p><h5>Large 5-Axis Machining Centers<\/h5><p>Large 5-axis machines are suitable for components with angled surfaces, complex contours, or features that must be machined from several directions. The additional rotary movement allows more features to be reached within the same setup and can reduce repeated datum transfer between operations.<\/p><p>Their value is therefore closely tied to part geometry and feature accessibility rather than simply to machine size.<\/p><h5>Vertical Turning Machines<\/h5><p>Vertical turning machines are commonly used for large rings, flanges, discs, and other rotational components. The workpiece is supported on a horizontal table, which can be advantageous for heavy parts because their weight is carried directly by the table during machining.<\/p><p>They are particularly suitable when large diameter is more important than long linear travel.<\/p><h5>Evaluating Machine Capacity<\/h5><p>Machine capacity has to be considered in the assembled machining condition. Nominal axis travel may be sufficient for the part itself, but the usable space is reduced by fixtures, clamping hardware, tool length, rotary-axis movement, and the clearance required to reach critical features.<\/p><p>Part weight and loading method also matter, especially for heavy components that require cranes or dedicated handling equipment. For this reason, the practical machining envelope is usually smaller and more constrained than the maximum travel values listed for the machine.<\/p><h2>4. Material and Blank Considerations<\/h2><p>For large CNC parts, material selection includes both the alloy and the form in which the material is supplied. Plate, billet, forging, casting, and weldment can behave very differently during machining even when the finished part has a similar geometry.<\/p><h5>Stock Form and Availability<\/h5><p>Large raw stock is not always available in the required size, grade, or condition. Plate and billet may be suitable for heavily machined structures, while forgings, castings, or weldments can reduce the amount of material that must be removed for larger or more complex shapes.<\/p><p>Blank availability can also affect lead time, especially when oversized plate, forgings, or castings require special procurement.<\/p><h5>Residual Stress and Material Condition<\/h5><p>Residual stress becomes more important when a large amount of material is removed from one side or from an uneven section of the blank. Rolled plate, forgings, castings, and welded structures can all contain residual stresses from previous manufacturing operations.<\/p><p>As machining changes the balance of these stresses, the workpiece may move between roughing and finishing. Material condition and previous heat treatment therefore need to be considered before the machining sequence is finalized.<\/p><h5>Thermal Behavior and Machinability<\/h5><p>Different materials respond differently to cutting heat and temperature change. Aluminum expands more than steel for the same temperature change, while materials such as stainless steel and titanium can create greater heat concentration at the cutting zone.<\/p><p>Machinability also affects cutting speed, tooling, cycle time, and tool reach strategy. For large parts, these effects accumulate over long machining cycles and large removal volumes.<\/p><h5>Weight and Handling<\/h5><p>Material density has a direct effect on workpiece weight, table loading, lifting, and repositioning. Two parts with similar dimensions can require very different handling strategies depending on whether they are made from aluminum, steel, or a heavier alloy.<\/p><p>The blank weight also affects fixture design and the equipment required to load, turn, and support the part during machining.<\/p><h2>5. Design and Process Planning for Large CNC Parts<\/h2><p>Large parts need to be planned around how the workpiece will be supported, reached, repositioned, and measured throughout machining. Decisions made in the design stage can directly affect setup count, tool rigidity, distortion, and final dimensional control.<\/p><h5>Setup and Feature Accessibility<\/h5><p>Each additional setup introduces another clamping condition and another datum transfer. Features that can be reached from the same orientation are generally easier to machine consistently than features that require repeated flipping or repositioning.<\/p><p>Deep pockets, narrow cavities, and features located far from an accessible machining face can also force the use of long or small-diameter tools. Where possible, providing more tool clearance and larger internal radii allows stiffer tooling and more stable cutting.<\/p><h5>Workholding and Part Stability<\/h5><p>Large parts often require dedicated support rather than standard workholding. The fixture has to locate the part securely while avoiding excessive clamping force or uneven support that could distort the workpiece.<\/p><p>Thin walls, long spans, and broad flat sections are especially sensitive. Temporary clamping areas, process holes, or sacrificial features can sometimes provide more reliable support during machining and be removed later if the design allows.<\/p><h5>Tolerances and Datum Strategy<\/h5><p>Tolerance planning becomes more important when critical features are separated by long distances or machined in different setups. The datum structure needs to remain practical for both machining and inspection.<\/p><p>Tight tolerances are most useful where they control fit, alignment, sealing, or another functional requirement. Applying the same tolerance level across large non-critical surfaces can increase machining and inspection effort without improving part function.<\/p><h5>Roughing, Finishing, and Process Stability<\/h5><p>Large parts with significant material removal are often machined in stages. Roughing removes most of the stock, while finishing is performed after the part has reached a more stable condition.<\/p><p>The machining sequence can also help control heat, cutting forces, and distortion. Tool overhang, unsupported features, and large changes in section thickness need to be considered when selecting cutting conditions and the order in which material is removed.<\/p><h5>Residual Stress and Stress Relief<\/h5><p>Residual stress can come from rolling, forging, casting, welding, heat treatment, or previous machining operations. Removing a large amount of material can redistribute those stresses and cause the part to move between roughing and final machining.<\/p><p>Stress-relief treatment may be appropriate for some welded structures, heavily machined blanks, or distortion-sensitive components, but it is not a universal requirement. The decision depends on the material condition, blank history, geometry, and amount of material being removed.<\/p><h2>6. Inspection of Large CNC Machined Parts<\/h2><p>Inspection becomes more complex as part size increases. Measurement access, workpiece support, datum location, and temperature can all affect the result, so the inspection method needs to be considered before the part leaves the machine.<\/p><h5>On-Machine Probing<\/h5><p>On-machine probing is useful for checking critical features while the workpiece remains in its machining setup. It can verify feature position, detect process drift, and confirm selected dimensions before the part is unclamped or repositioned.<\/p><p>This is particularly valuable for large parts because removing and reloading the workpiece may require significant handling and can change the relationship to the original machining datum.<\/p><h5>Large-Format and Portable Metrology<\/h5><p>Large coordinate measuring machines can be used when the workpiece fits within the available measurement volume and the required uncertainty supports the drawing tolerance.<\/p><p>For parts that are difficult to move or exceed conventional <a href=\"https:\/\/www.beskamold.com\/es\/what-is-cmm-inspection\/\">CMM<\/a> capacity, portable measurement systems such as articulated measuring arms or laser trackers may be used for suitable dimensions and geometries. The measurement method should match the feature, tolerance, and required accuracy rather than relying on one system for the entire part.<\/p><h5>Datum and Temperature Control<\/h5><p>Large dimensions are more sensitive to datum transfer and temperature variation. A measurement taken from a different support condition or reference setup can produce a different result even when the part itself has not changed.<\/p><p>Datum locations should therefore remain practical for machining and inspection, while temperature should be considered when tight tolerances extend across long distances.<\/p><h5>Final Inspection Planning<\/h5><p>Final inspection should focus on the dimensions, <a href=\"https:\/\/www.beskamold.com\/es\/gdt-and-tolerance-stack-up\/\">GD&amp;T<\/a> requirements, and feature relationships that control part function. The drawing, inspection method, measurement locations, and reporting requirements should be aligned before production begins.<\/p><p>For large parts, this planning is especially important when some features are checked on the machine and others are verified later with external metrology equipment.<\/p><h2>7. Cost and Lead-Time Drivers<\/h2><p>The cost of a large CNC part is often shaped before machining begins. Blank size, machine capacity, fixturing, inspection, and handling can require substantial preparation in addition to the cutting time itself.<\/p><h5>Material and Machine Time<\/h5><p>Large blanks increase both material cost and the amount of stock that may need to be removed. The starting form also matters. Machining from plate or billet can require extensive roughing, while forgings, castings, or weldments may reduce material removal but add their own sourcing and preparation requirements.<\/p><p>Machine time is affected by material, part geometry, tool access, removal volume, and the number of machining operations. Large parts may also occupy specialized equipment for long periods, making process efficiency particularly important.<\/p><h5>Setup, Fixturing, and Inspection<\/h5><p>Large parts often require dedicated fixtures, lifting preparation, CAM programming, and additional setup work. Complex repositioning or multiple machining orientations add further time before cutting resumes.<\/p><p>Inspection can also become a significant part of the manufacturing plan when large-format CMMs, portable metrology, special setups, or detailed dimensional reports are required.<\/p><h5>Handling and Logistics<\/h5><p>Moving a large workpiece can require cranes, lifting fixtures, reinforced packaging, or special transportation arrangements. Part dimensions and weight may also affect how the component can be loaded, shipped, and delivered.<\/p><p>These requirements are easy to overlook during quoting but can affect both cost and lead time before and after machining.<\/p><h5>Repeat Production<\/h5><p>Programming, fixture development, and process planning are often concentrated in the first production run. When the same setup and process can be reused, repeat orders may require less preparation per part.<\/p><p>The benefit depends on whether the design, material, tooling, and inspection requirements remain consistent between production runs.<\/p><h2>Conclusi\u00f3n<\/h2><p>Large part CNC machining requires more than sufficient machine travel. Workpiece stiffness, support, thermal behavior, tool access, handling, and inspection all influence whether a part can be produced consistently.<\/p><p>The most effective approach is to consider these constraints before machining begins, especially for parts with long spans, tight feature relationships, heavy material removal, or complex setups.<\/p><p>For <a href=\"https:\/\/www.beskamold.com\/es\/proveedor-de-servicios-de-mecanizado-cnc\/\">large CNC components<\/a>, Beska can review machine capacity, fixturing, tolerance, and inspection requirements during DFM to identify manufacturing risks before production.<\/p><h2>Preguntas frecuentes<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-8bd77ef e-flex e-con-boxed e-con e-parent\" data-id=\"8bd77ef\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-0236ee3 uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"0236ee3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-232' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-1d3bf35\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-1d3bf35 uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">What is large part CNC machining?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-B0JBdNTLPoR63txhB4LcrEiqn7f\">It refers to machining parts whose size, weight, or geometry affects machine capacity, fixturing, handling, tool access, or inspection.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-3994b85\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-3994b85 uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">What size parts can CNC machines handle?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-HCyMdgA2PoBf8dxrnfHc2L5enpb\">There is no fixed maximum size. Capacity depends on machine travel, table load, fixture space, tool clearance, and handling capability.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-761e772\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-761e772 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">What tolerances can large CNC machining achieve?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-WtaDdqSlXo0HlHxGcuQcYhtHnJh\">Tolerance capability varies with part size, geometry, material, setup, temperature, and inspection method. Critical features should be toleranced according to function rather than using one range for the entire part.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-e91ee6b\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-e91ee6b uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">How long does large part CNC machining take?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-AkwtdYRpPofvTkx1HAYcrzc9nCb\">Lead time depends on material availability, programming, fixturing, machining time, inspection, and any required finishing or special handling.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-0a07c46\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-0a07c46 uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">How can distortion be reduced when machining large parts?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-TNkmdh9neoFbR1xb7AgcwzkGn0d\">Stable support, controlled clamping, balanced material removal, staged roughing and finishing, and temperature control can all help reduce distortion.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-bb6c759\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-bb6c759 uael-question-span\" tabindex=\"0\" id=\"uael-faq-6\">Should I use casting, forging, weldment, or solid stock for a large part?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-R8vLdLfPYoe2SyxodKVcASHpn9b\">The choice depends on geometry, material requirements, quantity, machining allowance, and lead time. Each blank type changes how much machining and process preparation is required.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>A large part can fit within a CNC machine\u2019s travel and still be difficult to machine accurately. As part size and weight increase, workholding, thermal stability, handling, and inspection begin to influence the machining strategy as much as the cutting process itself. For engineers and buyers, the key question is no longer just whether a [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":34713,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-34698","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/34698","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/comments?post=34698"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/posts\/34698\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media\/34713"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/media?parent=34698"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/categories?post=34698"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/es\/wp-json\/wp\/v2\/tags?post=34698"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}