{"id":34014,"date":"2026-09-16T02:45:35","date_gmt":"2026-09-16T02:45:35","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=34014"},"modified":"2026-09-16T02:51:46","modified_gmt":"2026-09-16T02:51:46","slug":"what-is-6063-aluminum","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/he\/what-is-6063-aluminum\/","title":{"rendered":"What Is 6063 Aluminum? Properties, Uses &#038; 6061 Comparison"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"34014\" class=\"elementor elementor-34014\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-0a0a3f5 e-flex e-con-boxed e-con e-parent\" data-id=\"0a0a3f5\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-d565dfa elementor-widget elementor-widget-text-editor\" data-id=\"d565dfa\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>6063 aluminum is a heat-treatable Al-Mg-Si alloy known for good extrudability, surface finish, corrosion resistance, and thermal conductivity. Compared with <a href=\"https:\/\/www.beskamold.com\/he\/aluminum-6061\/\">6061<\/a>, it is generally used where appearance, complex extruded profiles, or heat dissipation matter more than maximum mechanical strength.<\/p><p>This guide covers the composition, mechanical and thermal properties, common tempers, CNC machining behavior, applications, limitations, and key differences between 6063 and 6061 aluminum. It also explains where 6063 performs well and when another aluminum alloy may be a better choice.<\/p><h2>1. What is 6063 Aluminum<\/h2><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/09\/What-is-aluminum-6063-profile.jpg\" class=\"alignnone size-full wp-image-34019 lazyload\" alt=\"What is aluminum 6063 profile\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-34019\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/09\/What-is-aluminum-6063-profile.jpg\" alt=\"What is aluminum 6063 profile\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/09\/What-is-aluminum-6063-profile.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/09\/What-is-aluminum-6063-profile-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/09\/What-is-aluminum-6063-profile-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/09\/What-is-aluminum-6063-profile-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/09\/What-is-aluminum-6063-profile-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>6063 aluminum is a heat-treatable Al-Mg-Si alloy in the 6xxx series, designated UNS A96063. It combines moderate strength with good corrosion resistance, thermal conductivity, and especially strong extrusion performance, which makes it widely used for profiles, housings, <a href=\"https:\/\/www.beskamold.com\/he\/products\/custom-cnc-machined-heatsinks\/\">heat sinks<\/a>, frames, and other parts where surface quality or complex cross-sections are important.<\/p><p>Magnesium and silicon provide the main strengthening elements and form Mg\u2082Si during heat treatment. 6063 is commonly supplied in tempers such as T5 and T6, with the final mechanical properties depending on the temper, product form, and applicable material specification.<\/p><p>Compared with 6061, 6063 generally offers better extrudability and is well suited to decorative or surface-sensitive applications, while 6061 is typically selected when higher mechanical strength is more important.<\/p><h2>2. Key Properties of 6063 Aluminum<\/h2><p>The properties of 6063 aluminum depend on the temper, product form, and applicable material specification. T5 and T6 are both commonly used conditions, with T6 generally providing higher strength after solution heat treatment and artificial aging.<\/p><h5>\u05de\u05d0\u05e4\u05d9\u05d9\u05e0\u05d9\u05dd \u05de\u05db\u05e0\u05d9\u05d9\u05dd<\/h5><p>6063 is considered a medium-strength aluminum alloy. For 6063-T6, commonly published reference values are around 240 MPa tensile strength and 210 MPa yield strength, although specified minimum values vary with product form, section thickness, and governing standard.<\/p><p>Its strength is lower than that of 6061-T6, which is one reason 6063 is more often selected for extruded profiles, housings, frames, and other parts where extrusion performance, surface appearance, or thermal management are more important than maximum structural strength.<\/p><p>Lower strength also means thin sections can be more sensitive to clamping pressure during machining, so workholding should be planned carefully where flatness or dimensional stability is important.<\/p><h5>Physical and Thermal Properties<\/h5><p>6063 has a density of approximately 2.70 g\/cm\u00b3, similar to other common aluminum alloys. Its coefficient of thermal expansion is around 23 \u00d7 10\u207b\u2076 \/\u00b0C, so temperature changes can affect dimensional measurements when tolerances become tight.<\/p><p>Thermal conductivity is one of 6063\u2019s useful characteristics, with commonly published values around 200 W\/m\u00b7K, depending on temper and material condition. Combined with its excellent extrudability, this makes 6063 widely used for heat sinks and other thermal-management components with complex finned profiles.<\/p><h5>Surface Finish and Anodizing<\/h5><p>6063 is also well suited to applications where surface appearance matters. Its alloy chemistry and strong extrusion characteristics can support smooth profiles and good <a href=\"https:\/\/www.beskamold.com\/he\/%d7%a1%d7%a4%d7%a7-%d7%a9%d7%99%d7%a8%d7%95%d7%aa%d7%99-%d7%90%d7%a0%d7%95%d7%93%d7%99%d7%96\/\">\u05d0\u05d9\u05dc\u05d2\u05d5\u05df<\/a> results.<\/p><p>The final anodized appearance still depends on factors such as material lot, extrusion quality, surface preparation, temper, and anodizing process control. For this reason, uniform color or defect-free finishing should not be treated as an inherent guarantee of the alloy itself.<\/p><h2>3. Chemical Composition of 6063 Aluminum<\/h2><p>6063 is an Al-Mg-Si alloy, with magnesium and silicon as its main alloying elements. These elements enable precipitation hardening while allowing the alloy to retain the extrusion characteristics for which 6063 is widely used.<\/p><table><colgroup> <col width=\"304\" \/> <col width=\"304\" \/><\/colgroup><tbody><tr><td><strong>\u05d0\u05b5\u05dc\u05b5\u05de\u05b6\u05e0\u05d8<\/strong><\/td><td><strong>Composition (wt.%)<\/strong><\/td><\/tr><tr><td>Aluminum (Al)<\/td><td>Remainder<\/td><\/tr><tr><td>Magnesium (Mg)<\/td><td>0.45\u20130.90<\/td><\/tr><tr><td>Silicon (Si)<\/td><td>0.20\u20130.60<\/td><\/tr><tr><td>Iron (Fe)<\/td><td>\u2264 0.35<\/td><\/tr><tr><td>\u05e0\u05d7\u05d5\u05e9\u05ea (Cu)<\/td><td>\u2264 0.10<\/td><\/tr><tr><td>Manganese (Mn)<\/td><td>\u2264 0.10<\/td><\/tr><tr><td>Chromium (Cr)<\/td><td>\u2264 0.10<\/td><\/tr><tr><td>Zinc (Zn)<\/td><td>\u2264 0.10<\/td><\/tr><tr><td>Titanium (Ti)<\/td><td>\u2264 0.10<\/td><\/tr><tr><td>Other, each<\/td><td>\u2264 0.05<\/td><\/tr><tr><td>Other, total<\/td><td>\u2264 0.15<\/td><\/tr><\/tbody><\/table><p>Composition limits are commonly published for AA 6063. Production material should be verified against the applicable specification and mill certificate.<\/p><p>Magnesium and silicon form the Mg\u2082Si strengthening phase during heat treatment. The relatively low levels of other alloying elements also help distinguish 6063 from higher-strength 6xxx alloys such as 6061.<\/p><h2>4. CNC Machining Characteristics of 6063 Aluminum<\/h2><p>6063 is frequently supplied as extruded stock, so its machining behavior is closely tied to the condition and geometry of the extrusion. It machines well in many applications, but thin sections, residual stress, and surface requirements still need attention.<\/p><h5>Extruded Stock and Dimensional Stability<\/h5><p>Extrusion allows 6063 to be produced in complex profiles before CNC machining, which can reduce the amount of material that needs to be removed later.<\/p><p>However, extruded sections may still contain residual stress or dimensional variation. Removing material from one side of a thin or uneven section can cause the part to move, especially during deep pocketing or finishing.<\/p><p>For parts with tighter tolerances, roughing and finishing should be planned with enough allowance to manage any movement that appears after material removal.<\/p><h5>Surface Finish and Machining Behavior<\/h5><p>6063 is relatively soft and generally machines cleanly, making it suitable for parts where a smooth visible surface is important.<\/p><p>At the same time, softer aluminum can develop built-up material on the cutting edge if tooling or cutting conditions are not well controlled. Sharp tools, stable cutting conditions, and suitable lubrication or coolant help maintain a cleaner machined surface.<\/p><p>This is especially important when the part will later be anodized, because machining marks and surface defects may remain visible after finishing.<\/p><h5>Fixturing Thin or Soft Sections<\/h5><p>Thin-wall 6063 profiles can be sensitive to concentrated clamping force. Excessive pressure may leave marks, distort the section, or affect flatness after the part is released.<\/p><p>Soft jaws, larger contact areas, and controlled clamping force can help support the part without damaging visible surfaces or flexible sections.<\/p><h2>5. Common Applications of 6063 Aluminum<\/h2><p>6063 aluminum is widely used where extrusion performance, surface appearance, corrosion resistance, and thermal conductivity are more important than maximum structural strength. Its applications range from heat-dissipation components to architectural profiles and lightweight housings.<\/p><h5>Heat Sinks and Thermal Components<\/h5><p>6063 is commonly used for heat sinks, LED housings, and other thermal-management parts. Its good thermal conductivity and excellent extrudability make it suitable for profiles with fins and other heat-dissipation features.<\/p><p>Anodizing is also commonly applied where corrosion resistance or appearance is important, although the final surface quality depends on the material condition and finishing process.<\/p><h5>Architectural and Decorative Profiles<\/h5><p>Window frames, curtain-wall profiles, handrails, trim, and similar components are common uses for 6063 aluminum.<\/p><p>Its extrusion characteristics make it suitable for long and relatively complex profiles, while its surface finish works well with anodizing, powder coating, and other decorative treatments.<\/p><h5>Lightweight Frames and Equipment Components<\/h5><p>6063 can also be used for machine frames, brackets, supports, covers, and other components that do not require the higher strength of alloys such as 6061.<\/p><p>In these applications, its low weight, corrosion resistance, and ability to form complex extruded sections can simplify both part design and manufacturing.<\/p><h5>Consumer and Electronic Housings<\/h5><p>Electronic enclosures, display frames, bezels, and sensor housings can benefit from 6063\u2019s smooth surface and finishing characteristics.<\/p><p>It is especially useful where the visible surface matters and where the component also needs moderate strength, low weight, or heat dissipation.<\/p><h2>6. 6063 vs 6061 Aluminum: Key Differences<\/h2><p>6063 and 6061 are both heat-treatable Al-Mg-Si alloys, but they are usually selected for different priorities. 6063 offers better extrudability and is well suited to visible, anodized, and heat-dissipation components, while 6061 is generally preferred when higher mechanical strength is required.<\/p><table><colgroup> <col width=\"245\" \/> <col width=\"245\" \/> <col width=\"245\" \/><\/colgroup><tbody><tr><td><strong>\u05e0\u05b6\u05db\u05b6\u05e1<\/strong><\/td><td><strong>6063-T6 Aluminum<\/strong><\/td><td><strong>6061-T6 Aluminum<\/strong><\/td><\/tr><tr><td>Typical tensile strength<\/td><td>Around 240 MPa<\/td><td>Around 290\u2013310 MPa<\/td><\/tr><tr><td>Relative strength<\/td><td>\u05dc\u05b0\u05de\u05b7\u05ea\u05b5\u05df<\/td><td>\u05d2\u05d1\u05d5\u05d4 \u05d9\u05d5\u05ea\u05e8<\/td><\/tr><tr><td>Thermal conductivity<\/td><td>Around 200 W\/m\u00b7K<\/td><td>Around 167 W\/m\u00b7K<\/td><\/tr><tr><td>Extrudability<\/td><td>Excellent, especially for complex or thin-wall profiles<\/td><td>Good, but generally less favorable for intricate profiles<\/td><\/tr><tr><td>Surface finish<\/td><td>Well suited to decorative and visible extrusions<\/td><td>Good, but less commonly chosen primarily for cosmetic extrusion<\/td><\/tr><tr><td>\u05d0\u05e0\u05d5\u05d3\u05d9\u05d6\u05e6\u05d9\u05d4<\/td><td>Often selected for applications where anodized appearance matters<\/td><td>Widely anodized, but alloy and process conditions can affect appearance<\/td><\/tr><tr><td>Typical uses<\/td><td>Heat sinks, architectural profiles, housings, trim, lightweight frames<\/td><td>Structural brackets, machine parts, fixtures, frames, higher-load components<\/td><\/tr><\/tbody><\/table><p>Typical values are for general comparison only. Actual properties depend on temper, product form, section thickness, and material specification.<\/p><p>The main trade-off is therefore extrudability and surface performance versus mechanical strength. If a part needs complex extruded geometry, good anodized appearance, or efficient heat transfer without high structural loads, 6063 may be the better fit. If strength, fatigue resistance, or load-carrying capacity is more important, 6061 is usually the stronger candidate.<\/p><p>The final choice should still consider the temper, geometry, manufacturing route, surface treatment, and actual service loads rather than alloy grade alone.<\/p><h2>7. Common Limitations of 6063 Aluminum<\/h2><p>6063 offers useful advantages in extrusion, surface finishing, and thermal applications, but its lower mechanical strength compared with alloys such as 6061 can limit its use in more demanding structural designs.<\/p><h5>Lower Mechanical Strength<\/h5><p>6063 is a medium-strength aluminum alloy and generally provides lower tensile and yield strength than 6061 in comparable tempers.<\/p><p>For parts exposed to higher structural loads, repeated impact, or demanding fatigue conditions, the required strength should be checked carefully before selecting 6063. In these cases, a higher-strength aluminum alloy may be more appropriate.<\/p><h5>Sensitivity to Clamping and Thin-Wall Distortion<\/h5><p>Thin or lightly supported 6063 sections can be sensitive to concentrated clamping pressure during machining. Excessive force may leave marks, deform the section, or affect flatness after the part is released.<\/p><p>Suitable support, larger contact areas, soft jaws, and controlled clamping force can help reduce these risks.<\/p><h5>Elevated-Temperature Service<\/h5><p>6063 is widely used for heat-dissipation components, but good thermal conductivity does not mean the alloy is suitable for every high-temperature application.<\/p><p>Long-term exposure to elevated temperatures can affect the properties of precipitation-hardened aluminum alloys. Parts used under sustained heat or repeated thermal cycling should therefore be evaluated according to the actual operating temperature, temper, load, and service requirements.<\/p><h5>Threads in Thin or Frequently Assembled Sections<\/h5><p>Threads machined directly into thin or relatively soft aluminum sections may be more vulnerable to wear or stripping when fasteners are repeatedly removed and installed.<\/p><p>Where repeated assembly is expected, thread engagement, wall thickness, tightening load, and the possible use of threaded inserts should be considered during design.<\/p><h2>\u05de\u05b7\u05e1\u05b0\u05e7\u05b8\u05e0\u05b8\u05d4<\/h2><p>6063 aluminum combines good extrudability, corrosion resistance, thermal conductivity, and surface-finishing potential with moderate mechanical strength. It is well suited to heat sinks, housings, extruded profiles, and other parts where complex geometry, appearance, or heat dissipation matter more than maximum structural strength. When higher load capacity is required, alloys such as 6061 may be a better starting point.<\/p><p>The final choice should consider the temper, stock form, section geometry, machining requirements, surface treatment, and actual service loads. <a href=\"https:\/\/www.beskamold.com\/he\/%d7%a4%d7%a0%d7%94-%d7%90%d7%9c%d7%99%d7%a0%d7%95\/\">For an RFQ<\/a>, providing these requirements together with the drawing gives Beska a clearer basis for material selection, machining planning, and quotation.<\/p><h2>\u05e9\u05d0\u05dc\u05d5\u05ea \u05e0\u05e4\u05d5\u05e6\u05d5\u05ea<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-dbb6e4c e-flex e-con-boxed e-con e-parent\" data-id=\"dbb6e4c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b26e257 uael-faq-box-layout-yes align-at-right elementor-widget elementor-widget-uael-faq\" data-id=\"b26e257\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-187' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-36daa20\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-right\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-36daa20 uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">Can 6063 aluminum replace 6061?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>It depends on the part requirements. 6063 is often preferred when extrudability, surface appearance, or thermal performance matters, while 6061 is generally a better choice when higher mechanical strength is required. Temper, geometry, loading, and manufacturing route should all be considered.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-2ec330b\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-right\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-2ec330b uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">Do 6063 and 6061 require different CNC cutting tools?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-HseSdTvVhodR6kx666IcSGHJnlh\">Not necessarily. Both alloys can often be machined with similar aluminum-cutting tools, but cutting parameters may need adjustment based on temper, stock condition, tool geometry, and the required surface finish.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-f8358d0\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-right\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-f8358d0 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">Is 6063 aluminum suitable for CNC machining?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-Xg62dltrdofFF6xjBICcSBfanjb\">Yes. Many 6063 parts are machined from extruded bar, tube, or profile. It generally machines well, although thin or soft sections may require careful clamping to avoid marks or distortion.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-eb19b50\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-right\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-eb19b50 uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">Why is 6063 commonly used for heat sinks?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-HyeNdvbRioZdN9xZC7vcyJZwnPg\">6063 combines good thermal conductivity with excellent extrudability. This makes it well suited to long profiles with fins and other complex cross-sections used in heat-dissipation components.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-7955613\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-right\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-7955613 uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">Is 6063 better than 6061 for anodizing?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-IC2pdNMAdois3fx9ytecYk2unmc\">6063 is widely used for visible and decorative anodized parts because it generally offers good surface-finishing characteristics. However, final color and appearance still depend on material condition, extrusion quality, surface preparation, and anodizing process control.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-d3d1a48\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-right\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-d3d1a48 uael-question-span\" tabindex=\"0\" id=\"uael-faq-6\">What is the difference between 6063-T5 and 6063-T6?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-HJEOddod2oLyPRxVKALczZ5wndc\">Both are artificially aged tempers, but T6 includes solution heat treatment before aging and generally provides higher mechanical strength. T5 is very common for extruded profiles where moderate strength is sufficient.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>6063 aluminum is a heat-treatable Al-Mg-Si alloy known for good extrudability, surface finish, corrosion resistance, and thermal conductivity. Compared with 6061, it is generally used where appearance, complex extruded profiles, or heat dissipation matter more than maximum mechanical strength. This guide covers the composition, mechanical and thermal properties, common tempers, CNC machining behavior, applications, limitations, [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":34028,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-34014","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/posts\/34014","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/comments?post=34014"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/posts\/34014\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/media\/34028"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/media?parent=34014"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/categories?post=34014"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/he\/wp-json\/wp\/v2\/tags?post=34014"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}