{"id":32697,"date":"2026-06-29T07:22:07","date_gmt":"2026-06-29T07:22:07","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=32697"},"modified":"2026-06-29T07:24:51","modified_gmt":"2026-06-29T07:24:51","slug":"what-are-datums","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/ru\/what-are-datums\/","title":{"rendered":"What Are Datums? A Guide to Engineering Drawings and GD&#038;T"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"32697\" class=\"elementor elementor-32697\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-93aee40 e-flex e-con-boxed e-con e-parent\" data-id=\"93aee40\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-50a1cc8 elementor-widget elementor-widget-text-editor\" data-id=\"50a1cc8\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>If you&#8217;ve ever looked at a GD&amp;T drawing and wondered why certain features are labeled A, B, or C, those letters identify datum features. They provide the reference system used to define dimensions, tolerances, and measurements throughout manufacturing, inspection, and assembly.<\/p><p>Choosing the wrong datum can lead to machining errors, inconsistent inspection results, and assembly problems, even when individual features appear to be within tolerance.<\/p><p>In this guide, you&#8217;ll learn what datums are, how to read datum symbols on engineering drawings, how the datum reference frame works, and how to choose datum features that support accurate<a href=\"https:\/\/www.beskamold.com\/ru\/%d0%bf%d0%be%d1%81%d1%82%d0%b0%d0%b2%d1%89%d0%b8%d0%ba-%d1%83%d1%81%d0%bb%d1%83%d0%b3-%d0%bf%d0%be-%d0%be%d0%b1%d1%80%d0%b0%d0%b1%d0%be%d1%82%d0%ba%d0%b5-%d0%bd%d0%b0-%d1%81%d1%82%d0%b0%d0%bd%d0%ba\/\"> \u041e\u0431\u0440\u0430\u0431\u043e\u0442\u043a\u0430 \u043d\u0430 \u0441\u0442\u0430\u043d\u043a\u0430\u0445 \u0441 \u0427\u041f\u0423<\/a> and inspection.<\/p><h2>1. What Is a Datum in Engineering Drawings?<\/h2><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/What-Is-a-Datum-in-Engineering-Drawings.jpg\" class=\"alignnone size-full wp-image-32705 lazyload\" alt=\"What Is a Datum in Engineering Drawings\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-32705\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/What-Is-a-Datum-in-Engineering-Drawings.jpg\" alt=\"What Is a Datum in Engineering Drawings\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/What-Is-a-Datum-in-Engineering-Drawings.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/What-Is-a-Datum-in-Engineering-Drawings-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/What-Is-a-Datum-in-Engineering-Drawings-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/What-Is-a-Datum-in-Engineering-Drawings-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/What-Is-a-Datum-in-Engineering-Drawings-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>A datum is a theoretically exact reference used to define where dimensions and tolerances are measured from. It can be be a point, a line, an axis, or a plane. Although it serves as the reference for manufacturing and inspection, a datum is not the physical feature on the part itself.<\/p><p>The physical feature is called the datum feature. The datum is the ideal geometric reference established from that feature. For example, when a milled face contacts a surface plate during inspection, the contact points establish the datum plane. That plane becomes the reference for all subsequent measurements, regardless of minor surface imperfections.<\/p><p>The difference between a datum and a datum feature directly affects inspection results. Two parts measured from different interpretations of the same datum feature can produce different results, even when the machining is identical. Consistent datum references help ensure repeatable inspection and reliable assembly.<\/p><h2>2. The Roles of Primary, Secondary, and Tertiary Datums<\/h2><p>Most parts require three datums to establish a complete reference system. Each datum constrains a different set of degrees of freedom, allowing every feature on the part to be located and measured consistently.<\/p><h5>Primary Datum<\/h5><p>The primary datum constrains the greatest number of degrees of freedom and is usually the largest, most stable feature on the part. For a flat plate, this is typically the bottom face. For a turned shaft, it&#8217;s usually the outer diameter.<\/p><p>From a machining perspective, the primary datum has the greatest influence on accuracy. If the part does not seat consistently in the fixture, every subsequent feature is affected by that instability.<\/p><h5>Secondary Datum<\/h5><p>The secondary datum is typically perpendicular to the primary datum and constrains two additional degrees of freedom. It&#8217;s often a side face or a precision bore that establishes the part&#8217;s orientation during machining, inspection, and assembly.<\/p><h5>Tertiary Datum<\/h5><p>The tertiary datum constrains the final degree of freedom, usually rotation. It&#8217;s commonly a locating hole, a flat, or a pin slot that fixes the remaining movement and completes the reference system.<\/p><p>These three datums define the Datum Reference Frame (DRF), the coordinate system used to establish every geometric tolerance on the drawing.<\/p><h2>3. How to Read Datum Symbols on a Drawing?<\/h2><p><img decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/How-to-Read-Datum-Symbols-on-a-Drawing.jpg\" class=\"alignnone size-full wp-image-32706 lazyload\" alt=\"How to Read Datum Symbols on a Drawing\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-32706\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/How-to-Read-Datum-Symbols-on-a-Drawing.jpg\" alt=\"How to Read Datum Symbols on a Drawing\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/How-to-Read-Datum-Symbols-on-a-Drawing.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/How-to-Read-Datum-Symbols-on-a-Drawing-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/How-to-Read-Datum-Symbols-on-a-Drawing-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/How-to-Read-Datum-Symbols-on-a-Drawing-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/How-to-Read-Datum-Symbols-on-a-Drawing-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>Datum symbols identify the features used as references for geometric tolerances and inspection. A datum symbol consists of a capital letter inside a rectangular frame connected to a filled triangle that points to the datum feature. The position of the symbol indicates what the datum references.<\/p><ul><li>On a surface or extension line: the datum is that surface.<\/li><li>On a diameter dimension: the datum is the axis of the feature.<\/li><li>In a feature control frame: the datum letters define the reference sequence used for the geometric tolerance.<\/li><\/ul><p>The order of the datum references is critical. A position tolerance may reference datums A, B, and C, establishing the primary, secondary, and tertiary datums. Changing that sequence changes how the tolerance zone is established, which can affect measurement results, inspection consistency, and assembly accuracy.<\/p><h2>4. How the Datum Reference Frame Is Established<\/h2><p>The Datum Reference Frame (DRF) is a three-dimensional coordinate system created from the primary, secondary, and tertiary datums. It provides the reference system used to define every geometric tolerance on the drawing.<\/p><p>The 3-2-1 rule establishes each datum plane by specifying the minimum number of contact points required for stable positioning.<\/p><table><colgroup> <col width=\"105\" \/> <col width=\"206\" \/><\/colgroup><tbody><tr><td><strong>\u0414\u0430\u0442\u0443\u043c<\/strong><\/td><td><strong>Minimum Contact Points<\/strong><\/td><\/tr><tr><td>Primary<\/td><td>3 points<\/td><\/tr><tr><td>Secondary<\/td><td>2 points<\/td><\/tr><tr><td>Tertiary<\/td><td>1 point<\/td><\/tr><\/tbody><\/table><p>This principle directly influences fixture design and inspection accuracy. A primary datum supported by fewer than three contact points can allow the part to rock, making subsequent measurements less reliable. The same principle applies during <a href=\"https:\/\/www.beskamold.com\/ru\/what-is-cmm-inspection\/\">CMM inspection<\/a>, where the datum plane is established from measured contact points. Too few contact points reduce measurement repeatability and can lead to inconsistent inspection results.<\/p><h2>5. How to Choose the Right Datum Features<\/h2><p>Selecting datum features is one of the most important decisions in part design. The best datum is not always the easiest surface to measure. It should reflect how the part functions in the assembly while providing a stable and repeatable reference throughout manufacturing and inspection.<\/p><h5>Functional Surfaces<\/h5><p>Choose surfaces that define how the part is assembled. If a bracket bolts to a baseplate, the mounting face is the natural primary datum. Although the top surface may be easier to reach with a CMM probe, it doesn&#8217;t represent the part&#8217;s functional position in the assembly.<\/p><h5>Stable Datum Features<\/h5><p>A large, stable surface provides a more reliable reference than a small flat or irregular feature. Datum features that shift under clamping or vary between setups introduce unnecessary variation, making positional errors appear inconsistent even when the machining process is stable.<\/p><h5>Machining Setup<\/h5><p>Whenever possible, the drawing datum should match the fixturing surface used during machining. When the machining setup and drawing reference differ, additional setup steps are required, increasing the likelihood of positioning errors during production and inspection.<\/p><h5>Multi-Operation Machining<\/h5><p>For parts requiring multiple machining operations, the datum used in later setups should already exist and be fully machined before it becomes the primary reference. Changing datum references between operations without accounting for their relationship often leads to dimensional variation from one setup to the next.<\/p><p>Well-selected datum features make machining more predictable, improve inspection consistency, and reduce unnecessary variation throughout production.<\/p><h2>6. Datums in CNC Machining: What Goes Wrong<\/h2><p>Most datum-related machining problems can be traced back to a few common setup mistakes. Identifying them early helps improve machining accuracy, inspection consistency, and assembly performance.<\/p><h5>Unfinished Datum Surfaces<\/h5><p>Using an unfinished stock face as the primary datum means every feature is machined from an uncontrolled reference. Any variation in the raw material carries through to every subsequent operation and measurement.<\/p><h5>Unstable Primary Datums<\/h5><p>A primary datum that cannot provide stable, repeatable contact in the fixture will shift under clamping pressure. The result is inconsistent positioning from part to part, often appearing as random variation in CMM inspection data.<\/p><h5>Drawing and Fixture Mismatch<\/h5><p>The drawing may define the bottom face as datum A, while the fixture locates the part from a side surface. The part can appear correct during machining but fail inspection because machining and measurement were based on different reference systems.<\/p><h5>Incorrect Datum Precedence<\/h5><p>Datum order in a feature control frame is not interchangeable. Changing or ignoring the A-B-C sequence changes how the tolerance zone is established and can cause otherwise acceptable parts to fail inspection.<\/p><p>For parts that use datum holes, machine the primary datum surface before finishing the hole. Otherwise, the hole may be accurately machined relative to the wrong reference, making later inspection and assembly more difficult.<\/p><p>Most datum-related problems originate from inconsistent reference systems rather than machining capability. Keeping the same datum strategy from setup through inspection is one of the most effective ways to improve dimensional consistency.<\/p><h2>7. Applications: Datums on Real Parts<\/h2><p><img loading=\"lazy\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/Applications-Datums-on-Real-CNC-Parts.jpg\" class=\"alignnone size-full wp-image-32708 lazyload\" alt=\"Applications Datums on Real CNC Parts\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-32708\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/Applications-Datums-on-Real-CNC-Parts.jpg\" alt=\"Applications Datums on Real CNC Parts\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/Applications-Datums-on-Real-CNC-Parts.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/Applications-Datums-on-Real-CNC-Parts-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/Applications-Datums-on-Real-CNC-Parts-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/Applications-Datums-on-Real-CNC-Parts-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/06\/Applications-Datums-on-Real-CNC-Parts-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>Different parts use different datum features, but the selection principles remain the same. The reference should reflect how the part is assembled, machined, and inspected. Below are three common examples.<\/p><h5>Housing Components<\/h5><p>A housing cover typically uses the mating face as datum A, a precision bore as datum B, and a dowel pin hole as datum C. This arrangement matches the assembly condition, allowing runout, perpendicularity, and bolt hole position to be measured from the features that matter most in service.<\/p><h5>Shaft Components<\/h5><p>For a turned shaft, the bearing journal is the natural primary datum because it supports the bearing during operation. Using the journal as the datum ensures that runout and shoulder perpendicularity are measured from the actual functional axis. Using a center drill hole instead creates a mismatch between the inspection reference and the assembly condition.<\/p><h5>Brackets and Plates<\/h5><p>Flat brackets commonly use the mounting face as the primary datum, a long edge as the secondary datum, and a locating hole as the tertiary datum. Thin plates require extra attention because clamping pressure can temporarily deform the part during inspection, making measurement results more difficult to interpret.<\/p><h2>8. Datum Selection Quick Reference<\/h2><p>Datum selection depends on part geometry, assembly requirements, and the manufacturing process. The table below provides a practical starting point for selecting primary datum features on common machined parts.<\/p><table><colgroup> <col width=\"170\" \/> <col width=\"221\" \/> <col width=\"170\" \/><\/colgroup><tbody><tr><td><strong>Part Type<\/strong><\/td><td><strong>Recommended Primary Datum<\/strong><\/td><td><strong>\u0418\u0437\u0431\u0435\u0433\u0430\u0442\u044c<\/strong><\/td><\/tr><tr><td>Flat plate or cover<\/td><td>Largest flat face<\/td><td>Small tabs or raised pads<\/td><\/tr><tr><td>Shaft or bushing<\/td><td>Bearing journal OD<\/td><td>Center drill hole<\/td><\/tr><tr><td>Prismatic part with assembly hole<\/td><td>Precision bore axis<\/td><td>Clearance hole<\/td><\/tr><tr><td>Multi-operation machining<\/td><td>First-op finished face<\/td><td>Raw stock surface<\/td><\/tr><tr><td>Thin-wall part<\/td><td>Full-face contact, soft fixture<\/td><td>Edge contact with rigid clamp<\/td><\/tr><\/tbody><\/table><p>These recommendations provide a practical starting point rather than fixed rules. After the primary datum is established, the remaining datums are usually determined by the part geometry, fixturing method, and assembly requirements. Stable datum features generally produce more consistent machining and inspection results than features that shift during clamping or vary between setups.<\/p><h2>9. When Implied Datums Become a Problem<\/h2><p>Not every engineering drawing defines datums explicitly. For simple parts with basic dimensions, implied datums are often acceptable. However, they become unreliable when multiple features or geometric tolerances need to share the same reference.<\/p><p>Problems arise when different people, inspection methods, or manufacturing processes interpret the reference differently. This commonly happens when multiple GD&amp;T callouts rely on the same datum, when tolerance stack-up analysis is required, or when parts are produced and inspected by different suppliers.<\/p><p>For parts with positional tolerances, profile callouts, or runout requirements, explicit datums are generally the better choice. They provide a consistent reference system for machining, inspection, and assembly. Without clearly defined datums, two CMM labs can measure the same part differently because each establishes a different reference.<\/p><h2>\u0417\u0430\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435<\/h2><p>Datum selection is a design decision with manufacturing consequences. A well-chosen datum reflects how a part functions, how it will be machined and inspected, and how it will be assembled. Selecting stable, functional reference features early in the design process helps improve machining accuracy, inspection consistency, and overall product quality.<\/p><p>\u0412 <a href=\"https:\/\/www.beskamold.com\/ru\/\">\u0411\u0435\u0441\u043a\u0430<\/a>, datum selection is part of every DFM review. We compare the drawing datums with the planned machining setup and fixturing strategy, recommending adjustments when they can simplify production or improve inspection repeatability before machining begins.<\/p><p>If you&#8217;re developing precision machined parts, we&#8217;re happy to review your drawings and discuss practical datum strategies for manufacturing.<\/p><h2>Deeper into Our Resources<\/h2><p>\u0414\u043b\u044f \u0432\u0430\u0448\u0435\u0433\u043e \u0441\u043e\u0434\u0435\u0440\u0436\u0430\u0442\u0435\u043b\u044c\u043d\u043e\u0433\u043e \u0447\u0442\u0435\u043d\u0438\u044f \u043c\u044b \u0441\u043e\u0441\u0442\u0430\u0432\u0438\u043b\u0438 \u0441\u043f\u0438\u0441\u043e\u043a \u0440\u0435\u043a\u043e\u043c\u0435\u043d\u0434\u0443\u0435\u043c\u044b\u0445 \u0441\u0442\u0430\u0442\u0435\u0439:<\/p><ul><li><a href=\"https:\/\/www.beskamold.com\/ru\/what-is-tolerance-stacking\/\">Tolerance Stack-Up in Assembly<\/a><\/li><\/ul><h2>\u0427\u0430\u0441\u0442\u043e \u0437\u0430\u0434\u0430\u0432\u0430\u0435\u043c\u044b\u0435 \u0432\u043e\u043f\u0440\u043e\u0441\u044b<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-f01d8b2 e-flex e-con-boxed e-con e-parent\" data-id=\"f01d8b2\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-3e8ded3 uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"3e8ded3\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-655' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-aecf6c2\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-aecf6c2 uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">Can a hole be used as a datum?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>Yes. A precision-reamed or bored hole is commonly used as a datum feature, with its axis serving as the datum. A drilled hole is usually less suitable because its position and size are not controlled well enough to provide a consistent reference.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-dd0d80d\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-dd0d80d uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">What's the difference between a datum and a datum feature?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>A datum is the theoretical reference used for measurement, while a datum feature is the physical surface or feature that establishes it. The two terms are closely related but are not interchangeable.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-bcd09ed\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-bcd09ed uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">Do datum letters have to follow A, B, and C in sequence?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>No. The letters are simply identifiers. What matters is that each letter consistently refers to the same datum feature throughout the drawing. The order shown in the feature control frame determines the datum precedence.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-714e6a0\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-714e6a0 uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">How many datums does a part typically need?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>Most prismatic parts use three datums to establish the coordinate system. Rotational parts often use two, while simple profile features may only require one.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-6484c14\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-6484c14 uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">Can the machining datum and inspection datum be different?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>Yes. However, their relationship must be clearly defined. If machining and inspection use different datums without proper control, dimensional errors and inconsistent inspection results can occur.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-7e1b0ed\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-7e1b0ed uael-question-span\" tabindex=\"0\" id=\"uael-faq-6\">How can you tell if the wrong datum was used?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>The problem usually appears during final inspection or assembly rather than during machining. Parts may meet the machining dimensions but fail CMM inspection because they were set up from a different reference than the drawing specifies. A consistent offset across multiple parts often indicates a datum or setup issue.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-eaef6a6\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-eaef6a6 uael-question-span\" tabindex=\"0\" id=\"uael-faq-7\">How tight should a datum feature be?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><p>A datum feature should be well controlled because any variation affects the features referenced from it. For critical datum features, additional controls such as flatness or position tolerances are often recommended.<\/p><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>If you&#8217;ve ever looked at a GD&amp;T drawing and wondered why certain features are labeled A, B, or C, those letters identify datum features. They provide the reference system used to define dimensions, tolerances, and measurements throughout manufacturing, inspection, and assembly. Choosing the wrong datum can lead to machining errors, inconsistent inspection results, and assembly [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":32717,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-32697","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/posts\/32697","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/comments?post=32697"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/posts\/32697\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/media\/32717"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/media?parent=32697"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/categories?post=32697"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/ru\/wp-json\/wp\/v2\/tags?post=32697"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}