{"id":34232,"date":"2026-10-07T03:58:14","date_gmt":"2026-10-07T03:58:14","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=34232"},"modified":"2026-10-07T04:01:39","modified_gmt":"2026-10-07T04:01:39","slug":"ppsu-vs-peek","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/tr\/ppsu-vs-peek\/","title":{"rendered":"PPSU vs PEEK: Properties, Machining &#038; Material Selection"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"34232\" class=\"elementor elementor-34232\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4acce12 e-flex e-con-boxed e-con e-parent\" data-id=\"4acce12\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-5b12f43 elementor-widget elementor-widget-text-editor\" data-id=\"5b12f43\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"https:\/\/www.beskamold.com\/tr\/cnc-machining-ppsu\/\">PPSU<\/a> and PEEK are both high-performance thermoplastics used in medical, industrial, and precision engineering applications, but their strengths are different. PPSU is valued for impact toughness and repeated steam sterilization, while PEEK offers higher temperature capability, stiffness, creep resistance, and broad chemical resistance.<\/p><p>These differences matter when a part must hold dimensions under heat, carry a sustained load, survive repeated sterilization, or meet tight machining requirements. Material grade, reinforcement, part geometry, and service conditions can also change how each plastic performs in production.<\/p><p>A useful PPSU vs PEEK comparison therefore goes beyond tensile strength or a single temperature rating. The sections below compare their thermal, mechanical, chemical, machining, and cost characteristics to show where each material has a practical advantage.<\/p><h2>1. What Are PPSU and PEEK: Material Overview<\/h2><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-PPSU-and-PEEK-Material-Overview.jpg\" class=\"alignnone wp-image-34234 size-full lazyload\" alt=\"What Are PPSU and PEEK: Material Overview\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone wp-image-34234 size-full\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-PPSU-and-PEEK-Material-Overview.jpg\" alt=\"What Are PPSU and PEEK: Material Overview\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-PPSU-and-PEEK-Material-Overview.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-PPSU-and-PEEK-Material-Overview-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-PPSU-and-PEEK-Material-Overview-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-PPSU-and-PEEK-Material-Overview-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-PPSU-and-PEEK-Material-Overview-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>PPSU and <a href=\"https:\/\/www.beskamold.com\/tr\/cnc-machining-peek\/\">G\u00d6Z ATMAK<\/a> are both high-performance thermoplastics, but they have different polymer structures and performance profiles.<\/p><ul><li>PPSU (Polyphenylsulfone) is an amorphous thermoplastic known for high impact toughness, heat resistance, hydrolytic stability, and repeated steam sterilization performance. Because it is amorphous, it does not have a crystalline melting point and softens progressively above its glass transition temperature. These properties make PPSU widely used in reusable medical devices, sterilization equipment, fluid-handling components, and other applications exposed to heat and moisture.<\/li><li>PEEK (Polyether Ether Ketone) is a semi-crystalline thermoplastic with a combination of high strength and stiffness, creep resistance, chemical resistance, and high-temperature performance. Its crystalline and amorphous regions allow it to retain useful mechanical properties under demanding thermal and mechanical conditions, which is why PEEK is often selected for highly loaded precision components and aggressive service environments.<\/li><\/ul><p>The amorphous structure of PPSU and the semi-crystalline structure of PEEK help explain many of their differences, but material grade, reinforcement, processing history, and part design also affect final performance.<\/p><h2>2. PPSU vs PEEK: Key Material Properties<\/h2><p>PPSU and PEEK overlap in many high-performance applications, but their mechanical and thermal profiles are quite different. The table below uses representative unfilled stock grades to show the general comparison.<\/p><table><colgroup> <col width=\"250\" \/> <col width=\"250\" \/> <col width=\"250\" \/><\/colgroup><tbody><tr><td><strong>M\u00fclk<\/strong><\/td><td><strong>PPSU<\/strong><\/td><td><strong>G\u00d6Z ATMAK<\/strong><\/td><\/tr><tr><td>Polymer structure<\/td><td>Amorphous<\/td><td>Yar\u0131 kristalin<\/td><\/tr><tr><td>Yo\u011funluk<\/td><td>~1.29 g\/cm\u00b3<\/td><td>~1.31 g\/cm\u00b3<\/td><\/tr><tr><td>Tensile strength at yield<\/td><td>~79 MPa<\/td><td>~110 MPa<\/td><\/tr><tr><td>Tensile modulus<\/td><td>~2.3 GPa<\/td><td>~4.5 GPa<\/td><\/tr><tr><td>Elongation at break<\/td><td>~60%<\/td><td>~30%<\/td><\/tr><tr><td>Heat deflection temperature<\/td><td>~207\u00b0C<\/td><td>~160\u00b0C<\/td><\/tr><tr><td>Long-term service temperature<\/td><td>~150\u00b0C<\/td><td>~250\u00b0C<\/td><\/tr><tr><td>Impact toughness<\/td><td>Daha y\u00fcksek<\/td><td>Lower than PPSU<\/td><\/tr><tr><td>Steam sterilization resistance<\/td><td>Harika<\/td><td>Harika<\/td><\/tr><tr><td>Chemical resistance<\/td><td>\u0130yi<\/td><td>Broader overall resistance<\/td><\/tr><\/tbody><\/table><p>These values show why a single temperature or strength figure can be misleading. PPSU can have a higher heat deflection temperature in some grades while still having a lower long-term service temperature than PEEK. PEEK, meanwhile, offers substantially higher stiffness and tensile strength, while PPSU retains an advantage in impact toughness.<\/p><p>Actual values vary with resin grade, reinforcement, stock form, and test method, so the material specification for the selected grade should be checked before final design.<\/p><h2>3. Temperature Resistance and Sterilization<\/h2><p>PPSU and PEEK both perform well at elevated temperatures, but their temperature ratings describe different things. Heat deflection temperature, glass transition temperature, and long-term service temperature should not be treated as interchangeable values.<\/p><h5>Long-Term Temperature Performance<\/h5><p>PEEK has the stronger advantage when a component must retain mechanical properties during prolonged exposure to high temperature. For unfilled PEEK grades, long-term mechanical temperature ratings can reach around 240\u00b0C, although the usable temperature of an actual part still depends on load, geometry, environment, and material grade.<\/p><p>PPSU also offers high heat resistance, but its long-term service temperature is generally lower. Representative medical-grade PPSU stock materials are commonly rated around 170\u00b0C for long-term use, with higher temperatures possible for shorter periods.<\/p><h5>Steam Sterilization<\/h5><p>PPSU performs particularly well in applications that undergo repeated steam sterilization. Its hydrolytic stability and impact toughness are major reasons it is widely used for reusable medical-device components, sterilization trays, and instrument handles.<\/p><p>PEEK also tolerates repeated sterilization and offers higher mechanical performance at elevated temperature. The choice between the two therefore depends on more than maximum temperature: load, chemical exposure, dimensional requirements, and the sterilization method all matter.<\/p><p>For reusable medical components, PPSU should not be treated as the lower-performance option simply because it is amorphous. In many steam-sterilization applications, its combination of toughness, hydrolytic stability, and heat resistance is exactly why it is selected.<\/p><h2>4. Mechanical Performance: Strength, Impact and Creep<\/h2><p>PPSU and PEEK have different mechanical strengths. PEEK generally provides higher tensile strength and stiffness, while PPSU stands out for impact toughness and its ability to tolerate repeated handling or shock without brittle failure.<\/p><h5>Strength and Stiffness<\/h5><p>Unfilled PEEK is typically stronger and stiffer than PPSU. This makes it better suited to structural components where the material must resist deformation under mechanical load or maintain tight dimensional relationships.<\/p><p>PPSU has lower stiffness, but its high toughness is valuable in components exposed to impact, repeated handling, or accidental drops. This is one reason PPSU is widely used in reusable medical equipment and protective components.<\/p><h5>Creep Under Sustained Load<\/h5><p>PEEK also has an advantage when a part carries a continuous load, especially at elevated temperature. Its semi-crystalline structure helps it retain stiffness and resist creep better than many amorphous thermoplastics.<\/p><p>PPSU can also support structural loads, but creep becomes more important when stress, temperature, and service time increase. For interference fits, clamped components, or other load-bearing features, long-term deformation should therefore be checked against the actual material grade and service conditions rather than relying only on room-temperature tensile data.<\/p><h5>Fatigue and Repeated Loading<\/h5><p>Both materials can perform well under repeated loading, but fatigue behavior depends strongly on stress level, temperature, geometry, surface condition, and material grade. PEEK is often favored when high stiffness and sustained mechanical performance are required, while PPSU may be more attractive where impact resistance and toughness are the dominant concerns.<\/p><h2>5. PPSU vs PEEK for CNC Machining<\/h2><p>Both PPSU and PEEK can be machined into tight-tolerance components, but machining behavior depends strongly on the material grade, stock condition, part geometry, and required tolerance.<\/p><h5>Machining Behavior<\/h5><p>PPSU machines well with sharp cutting tools and is commonly used for precision medical and industrial components. Because it has lower stiffness than PEEK, thin or lightly supported features may require careful fixturing to limit deflection during cutting.<\/p><p>Unfilled PEEK also has good machinability. Its higher stiffness can support dimensional control, while sharp tools and proper heat management help maintain surface quality. Reinforced PEEK grades containing glass or carbon fibers are more abrasive and can increase tool wear, so tooling should be selected according to the specific grade rather than treating all PEEK materials the same.<\/p><h5>Dimensional Stability and Stress Relief<\/h5><p>Heat generation, clamping force, material removal, and residual stress can affect both plastics during precision machining. <a href=\"https:\/\/www.beskamold.com\/tr\/thin-wall-machining\/\">\u0130nce duvarlar<\/a>, asymmetric material removal, and tight tolerances require particular attention to fixturing and machining sequence.<\/p><p><img decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/PPSU-vs-PEEK-for-CNC-Machining.jpg\" class=\"alignnone wp-image-34235 size-full lazyload\" alt=\"PPSU vs PEEK for CNC Machining\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone wp-image-34235 size-full\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/PPSU-vs-PEEK-for-CNC-Machining.jpg\" alt=\"PPSU vs PEEK for CNC Machining\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/PPSU-vs-PEEK-for-CNC-Machining.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/PPSU-vs-PEEK-for-CNC-Machining-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/PPSU-vs-PEEK-for-CNC-Machining-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/PPSU-vs-PEEK-for-CNC-Machining-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/PPSU-vs-PEEK-for-CNC-Machining-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>For PEEK parts with demanding dimensional or high-temperature requirements, stress-relief annealing may be used before final machining to reduce later dimensional change. It is not required for every PEEK component, and the need should be determined by the stock condition, geometry, tolerance, and service requirements.<\/p><h2>6. Cost and Material Selection<\/h2><p>PEEK generally carries a higher raw material cost than PPSU, but material price alone does not determine the final part cost. Stock size, material grade, reinforcement, part geometry, tolerance, machining time, tool wear, and any required post-machining treatment can all affect the manufacturing cost.<\/p><h5>When PPSU Makes More Sense<\/h5><p>PPSU can be a cost-effective choice when its heat resistance, impact toughness, chemical resistance, and sterilization performance already meet the application requirements. Paying for the higher mechanical and thermal capability of PEEK adds little value if the part does not need it.<\/p><h5>When PEEK Is Worth the Higher Cost<\/h5><p>PEEK becomes more attractive when the application requires higher stiffness, better creep resistance, broader chemical resistance, or stronger mechanical performance at elevated temperature. In these cases, material selection should be based on the service requirement rather than the lowest initial material price.<\/p><p>For CNC-machined parts, the cost difference should be evaluated using the actual grade and part design. Reinforced PEEK, very tight tolerances, thin walls, or stress-relief requirements can increase machining complexity, while unfilled PEEK should not automatically be treated as difficult or inefficient to machine.<\/p><h2>7. PPSU vs PEEK: Application Selection<\/h2><p>PPSU and PEEK overlap in many medical and industrial applications, so the better choice depends on which property matters most in the final part.<\/p><table><colgroup> <col width=\"269\" \/> <col width=\"269\" \/> <col width=\"269\" \/><\/colgroup><tbody><tr><td><strong>Application Requirement<\/strong><\/td><td><strong>PPSU Advantage<\/strong><\/td><td><strong>PEEK Advantage<\/strong><\/td><\/tr><tr><td>Repeated steam sterilization<\/td><td>Excellent hydrolytic stability and impact toughness; widely used in reusable medical devices<\/td><td>Also highly resistant to steam, with higher strength and temperature capability<\/td><\/tr><tr><td>Continuous high-temperature service<\/td><td>Suitable for demanding heat and moisture exposure<\/td><td>Better choice when higher long-term temperature capability and mechanical retention are required<\/td><\/tr><tr><td>Sustained mechanical load<\/td><td>Good toughness and structural performance<\/td><td>Stronger advantage in stiffness and long-term creep resistance<\/td><\/tr><tr><td>Impact or repeated handling<\/td><td>Strong advantage due to high impact toughness<\/td><td>Good toughness, but generally selected more for stiffness and high-temperature performance<\/td><\/tr><tr><td>Aggressive chemical exposure<\/td><td>Good resistance to many cleaning agents, disinfectants, and aqueous chemicals<\/td><td>Broader overall chemical resistance<\/td><\/tr><tr><td>Precision CNC components<\/td><td>Machinable with appropriate tooling and fixturing<\/td><td>Also highly machinable; reinforced grades may require more wear-resistant tooling<\/td><\/tr><tr><td>Cost-sensitive high-performance parts<\/td><td>Often more economical when PPSU already meets the service requirements<\/td><td>Higher material cost is easier to justify when its additional thermal, mechanical, or chemical performance is required<\/td><\/tr><\/tbody><\/table><p>Neither material should be selected from a single temperature or strength value. Sterilization method, sustained load, chemical exposure, required stiffness, part geometry, and material grade should be considered together.<\/p><h2>\u00c7\u00f6z\u00fcm<\/h2><p>PPSU and PEEK overlap in many demanding applications, but they solve different engineering priorities. PPSU stands out for impact toughness, hydrolytic stability, and repeated steam sterilization, while PEEK offers higher stiffness, better creep resistance, broader chemical resistance, and stronger mechanical performance at elevated temperatures.<\/p><p>For <a href=\"https:\/\/www.beskamold.com\/tr\/cnc-isleme-hizmeti-saglayicisi\/\">CNC-machined plastic parts<\/a>, Beska can manufacture PPSU and PEEK components to drawing requirements and review material grade, geometry, tolerance, and machining considerations before production. The better material is the one whose properties match the actual service conditions without adding unnecessary cost or performance margin.<\/p><h2>SSS<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-7f3f196 e-flex e-con-boxed e-con e-parent\" data-id=\"7f3f196\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-96105a2 uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"96105a2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-157' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-0d32774\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-0d32774 uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">Which is more heat resistant, PPSU or PEEK?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-NUHmdSiiyoEELyx8VcscZHOwnfb\">PEEK generally has the higher long-term temperature capability and retains mechanical properties better at elevated temperatures. PPSU still offers strong heat resistance, especially for repeated steam sterilization.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-8f9a6b2\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-8f9a6b2 uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">Which is better for repeated steam sterilization?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-TvXTdjCWqoh8akxuqRTcuqQmnJf\">Both materials can tolerate repeated steam sterilization. PPSU is especially well known for hydrolytic stability and impact toughness in reusable medical devices, while PEEK offers higher stiffness and temperature capability.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-dfa6690\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-dfa6690 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">When is PEEK worth the higher cost?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-KyFsdJJiTopRXuxdv41cqbH1nGb\">PEEK is easier to justify when a part needs higher stiffness, better creep resistance, broader chemical resistance, or stronger mechanical performance at elevated temperature.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-a1d8c1b\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-a1d8c1b uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">Is PEEK harder to machine than PPSU?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-L4cndh8UWoM45kxM8Xdc4z9xneb\">Not necessarily. Unfilled PEEK has good machinability, while glass- or carbon-filled grades can increase tool wear; PPSU machining also depends on geometry, fixturing, tolerance, and stock condition.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-24c3f19\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-24c3f19 uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">Is there a minimum safe wall thickness for PPSU or PEEK?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-SOrwdFRGZoGzvrxBR74cbNDSncc\">There is no universal minimum wall thickness. The practical limit depends on part geometry, unsupported span, tolerance, material grade, tooling, and fixturing.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-dedda3b\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-dedda3b uael-question-span\" tabindex=\"0\" id=\"uael-faq-6\">Can PPSU be used for reusable medical components?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-UXcOdfMVeolKWExtgq1cUM9Znxc\">Yes. PPSU is widely used in reusable medical components because of its impact toughness, hydrolytic stability, and resistance to repeated steam sterilization.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>PPSU and PEEK are both high-performance thermoplastics used in medical, industrial, and precision engineering applications, but their strengths are different. PPSU is valued for impact toughness and repeated steam sterilization, while PEEK offers higher temperature capability, stiffness, creep resistance, and broad chemical resistance. These differences matter when a part must hold dimensions under heat, carry [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":34247,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-34232","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/posts\/34232","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/comments?post=34232"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/posts\/34232\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/media\/34247"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/media?parent=34232"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/categories?post=34232"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/tags?post=34232"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}