{"id":34478,"date":"2026-10-29T08:48:48","date_gmt":"2026-10-29T08:48:48","guid":{"rendered":"https:\/\/www.beskamold.com\/?p=34478"},"modified":"2026-10-29T08:55:09","modified_gmt":"2026-10-29T08:55:09","slug":"15-5-ph-vs-17-4-ph-stainless-steel","status":"publish","type":"post","link":"https:\/\/www.beskamold.com\/tr\/15-5-ph-vs-17-4-ph-stainless-steel\/","title":{"rendered":"15-5 PH vs 17-4 PH Stainless Steel: Key Differences"},"content":{"rendered":"<div data-elementor-type=\"wp-post\" data-elementor-id=\"34478\" class=\"elementor elementor-34478\" data-elementor-post-type=\"post\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e66992f e-flex e-con-boxed e-con e-parent\" data-id=\"e66992f\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b66d920 elementor-widget elementor-widget-text-editor\" data-id=\"b66d920\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\t\t\t\t<p>17-4 PH and 15-5 PH are both precipitation-hardening stainless steels used for components that require high strength together with good corrosion resistance. Under comparable aging conditions, their tensile and yield strengths can be very similar, so material selection is rarely a simple question of which grade is stronger.<\/p><p>The more important difference lies in toughness and mechanical-property uniformity. 15-5 PH was developed to provide improved transverse properties compared with 17-4 PH, while 17-4 PH remains a widely used and well-established choice for many industrial applications.<\/p><p>For CNC-machined parts, the final decision also depends on heat-treatment condition, loading direction, corrosion environment, availability, and manufacturing requirements. The following sections compare where the two grades behave similarly and where the differences are large enough to affect material selection.<\/p><h2>1. What Are 15-5 PH and 17-4 PH Stainless Steels?<\/h2><p><a href=\"https:\/\/www.beskamold.com\/tr\/17-4-stainless-steel\/\">17-4 PH<\/a> (UNS S17400) and 15-5 PH (UNS S15500) are both martensitic precipitation-hardening stainless steels strengthened by copper-rich precipitates formed during aging. Their compositions are similar, with chromium, nickel, and copper as the main alloying elements, which is why the two grades can achieve comparable strength and general corrosion resistance under similar heat-treatment conditions.<\/p><p>The main difference is the consistency of their microstructure. 17-4 PH can retain small amounts of delta ferrite depending on melting and processing history, which may contribute to greater variation in transverse toughness and ductility.<\/p><p>15-5 PH was developed from 17-4 PH with tighter chemistry control and processing intended to minimize delta ferrite and improve property uniformity. As a result, it generally provides better transverse toughness and more consistent mechanical properties across different material directions while maintaining a similar overall strength level.<\/p><p><img fetchpriority=\"high\" decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-15-5-PH-and-17-4-PH-Stainless-Steels.jpg\" class=\"alignnone size-full wp-image-34480 lazyload\" alt=\"What Are 15-5 PH and 17-4 PH Stainless Steels\" width=\"1080\" height=\"550\"><noscript><img decoding=\"async\" class=\"alignnone size-full wp-image-34480\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-15-5-PH-and-17-4-PH-Stainless-Steels.jpg\" alt=\"What Are 15-5 PH and 17-4 PH Stainless Steels\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-15-5-PH-and-17-4-PH-Stainless-Steels.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-15-5-PH-and-17-4-PH-Stainless-Steels-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-15-5-PH-and-17-4-PH-Stainless-Steels-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-15-5-PH-and-17-4-PH-Stainless-Steels-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/What-Are-15-5-PH-and-17-4-PH-Stainless-Steels-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><h2>2. Mechanical Properties and Heat Treatment<\/h2><p>15-5 PH and 17-4 PH can both achieve high strength through precipitation hardening. Under comparable aging conditions, their tensile and yield strengths are generally close, so strength alone is rarely enough to distinguish between the two grades.<\/p><p>The heat-treatment condition often has a greater effect on final mechanical properties than the difference between 15-5 PH and 17-4 PH.<\/p><h5>Strength, Ductility, and Aging Condition<\/h5><p>Both grades are commonly supplied or aged to conditions such as H900, H1025, H1075, and H1150.<\/p><p>H900 produces the highest strength and hardness, but with lower ductility and toughness. As the aging temperature increases, strength generally decreases while ductility and toughness improve. H1025 provides an intermediate balance, while H1150 is often selected when toughness and ductility are more important than maximum strength.<\/p><p>This means material selection should consider both the stainless-steel grade and the required aging condition. A 17-4 PH part in one heat-treatment condition can have substantially different mechanical behavior from the same alloy in another condition.<\/p><h5>Transverse Toughness<\/h5><p>The more meaningful difference between the two grades appears in transverse mechanical properties.<\/p><p>17-4 PH can retain small amounts of delta ferrite depending on processing history, which may contribute to greater variation in toughness and ductility across different material directions. 15-5 PH was developed to reduce this effect and generally provides more consistent transverse properties.<\/p><p>This advantage becomes more relevant when a component is sensitive to impact loading, loading across the primary material direction, or mechanical-property uniformity through the section. It does not mean that 17-4 PH is limited to static loading or that 15-5 PH is required for every dynamically loaded component.<\/p><table><colgroup> <col width=\"305\" \/> <col width=\"305\" \/> <col width=\"305\" \/><\/colgroup><tbody><tr><td><strong>Comparison<\/strong><\/td><td><strong>17-4 PH<\/strong><\/td><td><strong>15-5 PH<\/strong><\/td><\/tr><tr><td>Tensile &amp; Yield Strength<\/td><td>Very high; similar to 15-5 PH under comparable aging conditions<\/td><td>Very high; similar to 17-4 PH under comparable aging conditions<\/td><\/tr><tr><td>H900<\/td><td>Highest strength and hardness, lower ductility and toughness<\/td><td>Same general strength\u2013toughness trend<\/td><\/tr><tr><td>H1025<\/td><td>Intermediate balance of strength and toughness<\/td><td>Intermediate balance of strength and toughness<\/td><\/tr><tr><td>H1150<\/td><td>Lower strength, higher ductility and toughness<\/td><td>Lower strength, higher ductility and toughness<\/td><\/tr><tr><td>Transverse Toughness<\/td><td>More dependent on material direction and processing history<\/td><td>Generally more uniform<\/td><\/tr><tr><td>Main Selection Advantage<\/td><td>Widely specified high-strength PH stainless steel<\/td><td>Improved transverse toughness and property uniformity<\/td><\/tr><\/tbody><\/table><p>Exact mechanical properties depend on product form, material specification, and heat-treatment condition, so drawing requirements should be checked against the applicable material standard rather than the alloy designation alone.<\/p><h2>3. Corrosion Resistance of 15-5 PH vs 17-4 PH<\/h2><p>15-5 PH and 17-4 PH provide broadly similar corrosion resistance for many industrial applications. Corrosion performance is therefore usually not the main reason to choose one grade over the other.<\/p><h5>General Corrosion Resistance<\/h5><p>Both alloys contain enough chromium to form a protective passive film and provide good resistance in atmospheric, fresh-water, and many mildly corrosive industrial environments.<\/p><p>Their overall corrosion behavior is generally comparable, so the improved transverse toughness of 15-5 PH should not be interpreted as a major corrosion-resistance advantage over 17-4 PH.<\/p><h5>Effect of Environment and Heat Treatment<\/h5><p>Actual corrosion performance depends strongly on the service environment. Chloride concentration, temperature, exposure time, surface condition, and residual stress can all affect pitting, crevice corrosion, and stress-corrosion cracking.<\/p><p>Heat-treatment condition also matters. Peak-strength conditions such as H900 generally provide higher hardness and strength, while higher-temperature aging conditions can improve resistance to stress-corrosion cracking when lower hardness is acceptable.<\/p><h5>Material Selection for Corrosive Service<\/h5><p>For normal atmospheric and many industrial environments, corrosion resistance alone is unlikely to justify changing from 17-4 PH to 15-5 PH.<\/p><p>In more aggressive chloride, marine, or chemical environments, the first question should be whether either PH stainless grade is appropriate for the service condition. In such cases, austenitic or duplex stainless steels may provide better corrosion resistance, depending on the specific environment.<\/p><p>Surface finish, <a href=\"https:\/\/www.beskamold.com\/tr\/what-is-passivation\/\">pasivasyon<\/a>, heat treatment, and actual exposure conditions should be considered together with the alloy grade when corrosion performance is critical.<\/p><h2>4. CNC Machinability and Heat-Treatment Considerations<\/h2><p>15-5 PH and 17-4 PH have broadly similar CNC machining behavior. In practice, the heat-treatment condition and machining sequence usually have a greater effect on cutting performance than the difference between the two grades.<\/p><h5>Machining Before Aging<\/h5><p>Both alloys are commonly machined in the solution-treated condition before precipitation hardening. They are easier to cut in this condition than after aging to higher hardness levels, although they should not be treated as soft free-machining stainless steels.<\/p><p>Roughing, drilling, threading, and other material-removal operations are often completed before final aging when the part design and tolerance strategy allow it. This reduces tool wear and avoids unnecessary machining in the hardened condition.<\/p><h5>Machining After Aging<\/h5><p>After aging, especially in higher-strength conditions such as H900, both alloys become more demanding to machine. Higher hardness increases cutting forces and tool wear, so rigid fixturing, suitable carbide tooling, stable cutting conditions, and effective coolant control become more important.<\/p><p>There is no consistent machinability advantage that makes 15-5 PH clearly easier to machine than 17-4 PH. For most CNC parts, the selected hardness condition and feature geometry matter more.<\/p><h5>Distortion and Final Finishing<\/h5><p>Precipitation aging is performed at relatively moderate temperatures, but dimensional change and distortion can still matter for thin walls, asymmetric sections, or tightly toleranced features.<\/p><p>For critical parts, a common strategy is to complete most machining before aging, leave controlled finishing allowance where necessary, and finish or grind critical surfaces after heat treatment.<\/p><p>Final inspection should be performed after the required heat-treatment and finishing sequence, especially for features whose position, flatness, or size is sensitive to thermal movement.<\/p><h2>5. 15-5 PH vs 17-4 PH: Which Should You Choose?<\/h2><p>For many parts, both 15-5 PH and 17-4 PH can meet similar strength requirements. The choice usually depends on whether the project needs the improved transverse toughness and property uniformity of 15-5 PH, or whether the broader availability and established use of 17-4 PH are sufficient.<\/p><table><colgroup> <col width=\"369\" \/> <col width=\"369\" \/><\/colgroup><tbody><tr><td><strong>Gereklilik<\/strong><\/td><td><strong>More Likely Choice<\/strong><\/td><\/tr><tr><td>High strength with good general corrosion resistance<\/td><td>17-4 PH or 15-5 PH<\/td><\/tr><tr><td>Broad material availability and common industrial use<\/td><td>17-4 PH<\/td><\/tr><tr><td>Improved transverse toughness<\/td><td>15-5 PH<\/td><\/tr><tr><td>More uniform mechanical properties across material directions<\/td><td>15-5 PH<\/td><\/tr><tr><td>Maximum strength after aging<\/td><td>Either grade, depending on heat-treatment condition<\/td><\/tr><tr><td>Corrosion resistance as the main concern<\/td><td>Usually not enough to distinguish the two<\/td><\/tr><tr><td>CNC machinability as the main concern<\/td><td>Usually not enough to distinguish the two<\/td><\/tr><tr><td>Drawing or industry specification requires a specific UNS or material grade<\/td><td>Follow the specified grade<\/td><\/tr><\/tbody><\/table><h5>When 17-4 PH Is Usually Enough<\/h5><p>17-4 PH remains a practical choice when the required strength, toughness, corrosion resistance, and heat-treatment condition can all be met without a specific need for improved transverse properties.<\/p><p>Its widespread use and availability also make it a common starting point for general high-strength stainless-steel components.<\/p><h5>When 15-5 PH Becomes More Attractive<\/h5><p>15-5 PH is more useful when transverse toughness, ductility, or mechanical-property uniformity is important to the design.<\/p><p>This can matter for parts where loading direction, section orientation, or reliability requirements make variation in transverse properties more significant.<\/p><p>The final material decision should still be checked against the drawing specification, product form, required heat-treatment condition, mechanical-property requirements, and any customer or industry approval requirements.<\/p><h2>6. Typical Applications of 15-5 PH and 17-4 PH<\/h2><p><img decoding=\"async\" src=\"data:image\/gif;base64,R0lGODlhAQABAIAAAAAAAP\/\/\/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7\" data-src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/Typical-Applications-of-15-5-PH-and-17-4-PH.jpg\" class=\"alignnone size-full wp-image-34481 lazyload\" alt=\"Typical Applications of 15-5 PH and 17-4 PH\" width=\"1080\" height=\"550\"><noscript><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-34481\" src=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/Typical-Applications-of-15-5-PH-and-17-4-PH.jpg\" alt=\"Typical Applications of 15-5 PH and 17-4 PH\" width=\"1080\" height=\"550\" srcset=\"https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/Typical-Applications-of-15-5-PH-and-17-4-PH.jpg 1080w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/Typical-Applications-of-15-5-PH-and-17-4-PH-300x153.jpg 300w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/Typical-Applications-of-15-5-PH-and-17-4-PH-1024x521.jpg 1024w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/Typical-Applications-of-15-5-PH-and-17-4-PH-768x391.jpg 768w, https:\/\/www.beskamold.com\/wp-content\/uploads\/2026\/10\/Typical-Applications-of-15-5-PH-and-17-4-PH-18x9.jpg 18w\" sizes=\"(max-width: 1080px) 100vw, 1080px\" \/><\/noscript><\/p><p>17-4 PH and 15-5 PH are both used for high-strength stainless-steel components in aerospace, industrial equipment, fluid systems, and precision mechanical assemblies. Their application areas overlap considerably, so the material choice is usually driven by the required mechanical properties rather than by industry alone.<\/p><h5>17-4 PH Applications<\/h5><p>17-4 PH is commonly specified for components such as shafts, fasteners, pump and valve parts, structural hardware, and general high-strength machined components. It is also widely used in aerospace, energy, and industrial equipment where high strength and good corrosion resistance are required without a specific need for improved transverse properties.<\/p><p>Its broad availability and well-established heat-treatment practice make it a practical choice for many conventional PH stainless-steel applications.<\/p><h5>15-5 PH Applications<\/h5><p>15-5 PH appears in many of the same industries, but it becomes more attractive when transverse toughness and mechanical-property uniformity are more important to the design.<\/p><p>Typical examples include aerospace fittings, precision shafts, motion-system components, and other high-strength parts where loading direction or section orientation makes transverse performance more relevant.<\/p><h5>Application Limits<\/h5><p>Neither alloy should be selected for aggressive corrosive or elevated-temperature service based on strength alone. Chloride exposure, chemical environment, operating temperature, heat-treatment condition, and required service life should all be reviewed before either grade is specified.<\/p><p>Where corrosion resistance is the dominant requirement, an austenitic or <a href=\"https:\/\/www.beskamold.com\/tr\/super-duplex-stainless-steel\/\">duplex stainless steel<\/a> may be more appropriate.<\/p><h2>\u00c7\u00f6z\u00fcm<\/h2><p>15-5 PH and 17-4 PH offer similar strength, corrosion resistance, and CNC machinability under comparable heat-treatment conditions. The main reason to choose 15-5 PH is its improved transverse toughness and more uniform mechanical properties, while 17-4 PH remains a practical choice for many high-strength stainless-steel components.<\/p><p>For CNC-machined 15-5 PH and 17-4 PH parts, Beska supports material review, machining, heat-treatment coordination, final finishing, and dimensional inspection from prototype through production.<\/p><h2>SSS<\/h2>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-2b548e9 e-flex e-con-boxed e-con e-parent\" data-id=\"2b548e9\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a4a7a1a uael-faq-box-layout-yes align-at-left elementor-widget elementor-widget-uael-faq\" data-id=\"a4a7a1a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"uael-faq.default\">\n\t\t\t\t<div class=\"elementor-widget-container\">\n\t\t\t\t\t\n\t\t\t<div id='uael-faq-wrapper-172' class=\"uael-faq-wrapper\">\n\t\t\t\t<div class=\"uael-faq-container uael-faq-layout-accordion\" data-layout=\"accordion\" >\n\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-32642c5\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-32642c5 uael-question-span\" tabindex=\"0\" id=\"uael-faq-1\">Does 15-5 PH cost more than 17-4 PH?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-OvVHdWrLho7znRxAEBIcEUFUnQg\">15-5 PH may carry a higher material premium or have more limited availability, depending on product form and supplier. Total part cost should also consider machining, heat treatment, and inspection requirements.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-f49adab\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-f49adab uael-question-span\" tabindex=\"0\" id=\"uael-faq-2\">Can 15-5 PH directly replace 17-4 PH?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-XKnTdIlhYoe108xWrulckQn0n6b\">Not automatically. The substitution should be checked against the drawing, material specification, heat-treatment condition, required properties, and any customer or industry approval requirements.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-f0902c5\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-f0902c5 uael-question-span\" tabindex=\"0\" id=\"uael-faq-3\">Are there differences in welding performance between 15-5 PH and 17-4 PH?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-YJ4OdwVbnoVKCxxbIsIcn7lBnvf\">Both grades can be welded, but the welding procedure and any post-weld heat treatment should be selected according to the required final properties and applicable specification.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-caba607\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-caba607 uael-question-span\" tabindex=\"0\" id=\"uael-faq-4\">Do 15-5 PH and 17-4 PH require different passivation processes?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-YbZbdxgXTobpMtxlVtZcFEhVnKf\">Both alloys can be passivated using established stainless-steel procedures. The actual process should follow the applicable specification and the condition of the machined surface.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-6f25ceb\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-6f25ceb uael-question-span\" tabindex=\"0\" id=\"uael-faq-5\">Is 15-5 PH always better than 17-4 PH?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-PPCudoufSoW2HXxxhm7csl6enQb\">No. 15-5 PH is mainly preferred when improved transverse toughness and property uniformity are important; otherwise, 17-4 PH may already meet the design requirements.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div id=\"uael-accordion-6e8c9f9\" class=\"uael-faq-accordion\" role=\"tablist\">\n\t\t\t\t\t\t\t\t<div class= \"uael-accordion-title\" aria-expanded=\"false\" role=\"tab\">\n\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon uael-accordion-icon-left\">\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-closed\"><i class=\"fas fa-angle-right\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t\t<span class=\"uael-accordion-icon-opened\"><i class=\"fas fa-angle-up\"><\/i><\/span>\n\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"uael-question-6e8c9f9 uael-question-span\" tabindex=\"0\" id=\"uael-faq-6\">What tolerances should be considered after aging?<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<div class=\"uael-accordion-content\" role=\"tabpanel\">\n\t\t\t\t\t\t\t\t\t<span>\n\t\t\t\t\t\t\t\t\t<span><div data-page-id=\"H8PrdHHajow3M1xcfTmcXCfsnVf\" data-lark-html-role=\"root\" data-docx-has-block-data=\"false\"><div class=\"ace-line ace-line old-record-id-MkdYdsp40obghZxlXNjcP20Enqb\">There is no single post-aging tolerance for either alloy. Critical dimensions should be planned around part geometry, heat-treatment condition, and whether final machining or grinding will be performed after aging.<\/div><\/div><\/span>\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>","protected":false},"excerpt":{"rendered":"<p>17-4 PH and 15-5 PH are both precipitation-hardening stainless steels used for components that require high strength together with good corrosion resistance. Under comparable aging conditions, their tensile and yield strengths can be very similar, so material selection is rarely a simple question of which grade is stronger. The more important difference lies in toughness [&hellip;]<\/p>\n","protected":false},"author":12,"featured_media":34487,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[47],"tags":[],"class_list":["post-34478","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/posts\/34478","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/users\/12"}],"replies":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/comments?post=34478"}],"version-history":[{"count":0,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/posts\/34478\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/media\/34487"}],"wp:attachment":[{"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/media?parent=34478"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/categories?post=34478"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.beskamold.com\/tr\/wp-json\/wp\/v2\/tags?post=34478"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}