[gtranslate]

Aerospace Industry

  • From Aircraft & Aerospace Prototyping to Mass Production
  • ISO 9001:2015 Certified
  • Aerospace-grade Materials

Why Aerospace Clients Work with Us

Beska produces tight-tolerance components for aerospace applications through CNC machining, sheet metal fabrication, and plastic molding. If you’re developing prototypes or scaling production, we help you move faster with custom solutions.

ISO9001:2015 certified. We’re committed to delivering aerospace parts to the industry standard with repeatable quality and high efficiency.

Engineering Guidance. During the testing or production stages, the Beska’s experienced engineers can offer guidance on design and material & surface finish selection.

Tight Tolerance. According to your 2D & 3D files, we produce custom aerospace parts with tight tolerance up to ±0.005 mm

Aerospace-grade materials. We are well-experienced with dealing with aerospace-grade materials like 7075-T6 aluminum and PEEK.

Surface finishing. To make these finished aerospace prototypes more durable or smooth, we would like to choose the best-suited surface finish. 

Lead Time. As for low-volume production, we can deliver the custom parts to you within 2~4 weeks. 

Case Study: Aerospace Mounting Brackets

Aluminum Mounting Brackets

In late 2024, an aerospace mechanical engineer from Ireland sent us 2D & 3D drawings for mounting brackets. From these drawings, we found that these parts included several machined slots, undercuts, and critical faces for sensor alignment. They were planning on doing limited trials. So, time was tight, and their team wanted to avoid delays caused by design-related rework and production rework.

Challenge: It looks like a simple project. But it has several challenges. For example, according to the drawings, one corner of the parts required a tight-radius slot, which was prone to chatter during milling.

Solution: After reviewing the part, our engineering team scheduled a 30-minute video call with the client. we made one first-article part within two days, shared close-up photos, and asked for confirmation before running the rest.

Client Feedback: “Having that first part photo check was super helpful—we didn’t expect it but really appreciated it.” 

Surface Finishes For Aerospace Parts

At Beska, we apply a list of surface finishes to improve the durability and surface finish of the custom aerospace parts.

Powder Coating

Powder Coating

It is a popular surface finishing for machining metal parts, offering durability, a sleek look, cost – effectiveness, and environmental friendliness.

anodizing-finish

Anodizing

It involves immersing the metal in an electrolyte solution and applying an electric current, which forms a protective oxide layer on the metal parts.

nickel-plating-finish

Nickel Plating

It’s a widely used process that involves depositing a thin layer of nickel onto a substrate, enhancing the durability, corrosion resistance, and aesthetic appeal of various machining metal components.

sandblasting-finish

Sandblasting

It’s a surface finishing process that uses high – pressure air to propel abrasive sand particles onto a surface, effectively removing impurities, smoothing rough edges, and creating a uniform texture.

chrome-plating-finish

Chrome Plating

It’s a process that coats a metal surface, typically steel, with a thin layer of chromium through electroplating. This coating improves the metal part’s durability, corrosion resistance, and aesthetic appeal.

heat-treatment-finish

Heat Treatment

The process involves heating the material to a specific temperature, holding it at that temperature for a certain period, and then cooling it at a controlled rate.

The Custom Aerospace Parts We Make

At Beska, we support aerospace engineers and supply chain teams with a wide range of custom components. Below are the common parts that we frequently manufacture for aerospace applications:

CNC Machining Parts (Aluminum 6061/7075, Stainless Steel, Engineering Plastics): Sensor housings, suspension brackets, gearbox covers, cooling channel blocks, motor housings, control lever arms, aircraft seat components (metal inserts), custom heat sinks, tooling jigs, and fixtures

Sheet Metal Fabrication Parts (Aluminum, Stainless Steel):
Avionics enclosures, shielding boxes, mounting plates, support arms, airflow deflectors, chassis frames, connector brackets, and structural covers.

Plastic Injection Molding Parts (ABS, PC, PA66, PEEK, PPS):
Insulation covers, air duct housings, light diffusers, connector shells, clips and fasteners, internal knobs and control interfaces, plastic enclosures, bracket spacers, and indicator panel frames.

Common Aerospace Parts We Make

Discover Our Aerospace Machining Services

We provide high-precision CNC machining, custom sheet metal fabrication, and rapid injection molding for prototypes and custom parts.

CNC Milling Service-Beska Mold
5-axis CNC Machining Service-Beska Mold

CNC Milling 

With a fleet of 40+ CNC milling machines, we handle parts of all complexities. From simple to intricate designs, we provide cost-effective solutions.

CNC Turning 

At Beska, we have 8 sets of CNC turning machines and 5 sets of automatic lathes enable us to produce high-quality turned parts efficiently. 

5-axis CNC Machining

Using advanced Mazak CNC machines, we achieve remarkable precision in producing complex parts, with tolerances up to ±0.005mm. 

Sheet Metal Components
Sheet Metal Laser Cutting Parts
Sheet Metal Parts

Sheet Metal Welding

TIG/MIG welding ensures strong, clean joints; Low-heat methods minimize warping risks.

Sheet Metal Laser Cutting

Our high-speed laser cutters can handle diverse materials from thin gauges to heavy-duty plates.

Sheet Metal Bending

The bending machines are compatible with stainless steel, aluminum, and specialty alloys.

Custom injection molds
what is plastic injection molding

Rapid Tooling

After receiving your 2D & 3D files, our engineers would analyze your design and customize the aluminum molds.

Overmolding

It ensures a perfect bond between base and overmolded materials, delivering products with superior performance.

Insert Molding 

We integrate multiple materials into a single component for enhanced functionality and durability.

Populal Industries Served

Except for aerospace, we have been delivering custom parts to other popular industries like automotive, electronics, and medical.

FAQ

To ensure the quality of the final parts, we provide full traceability documentation like material certifications, First Article Inspection Reports (FAIR), and CMM inspection report. 

At Beska, we often provide anodizing (Type II & III), passivation, alodine, sandblasting, and other custom coatings on aerospace parts.

Yes. At Beska, our engineers work early with R&D engineers in the design phase to optimize for material selection, machining feasibility, and cost-efficiency to meet the standard of the aerospace industry.

 

It's Time to Get An Aerospace Manufacturing Quote!

en_USEnglish