[gtranslate]

תעשייה אווירית

  • From Aircraft & Aerospace Prototyping to Mass Production
  • ISO 9001:2015 Certified
  • Aerospace-grade Materials

Why Aerospace Clients Work with Us

Beska produces tight-tolerance components for aerospace applications through CNC machining, sheet metal fabrication, and plastic molding. If you’re developing prototypes or scaling production, we help you move faster with custom solutions.

ISO9001:2015 certified. We’re committed to delivering aerospace parts to the industry standard with repeatable quality and high efficiency.

Engineering Guidance. During the testing or production stages, the Beska’s experienced engineers can offer guidance on design and material & surface finish selection.

Tight Tolerance. According to your 2D & 3D files, we produce custom aerospace parts with tight tolerance up to ±0.005 mm

Aerospace-grade materials. We are well-experienced with dealing with aerospace-grade materials like 7075-T6 aluminum and PEEK.

Surface finishing. To make these finished aerospace prototypes more durable or smooth, we would like to choose the best-suited surface finish. 

Lead Time. As for low-volume production, we can deliver the custom parts to you within 2~4 weeks. 

Case Study: Aerospace Mounting Brackets

Aluminum Mounting Brackets

In late 2024, an aerospace mechanical engineer from Ireland sent us 2D & 3D drawings for mounting brackets. From these drawings, we found that these parts included several machined slots, undercuts, and critical faces for sensor alignment. They were planning on doing limited trials. So, time was tight, and their team wanted to avoid delays caused by design-related rework and production rework.

אֶתגָר: It looks like a simple project. But it has several challenges. For example, according to the drawings, one corner of the parts required a tight-radius slot, which was prone to chatter during milling.

פִּתָרוֹן: After reviewing the part, our engineering team scheduled a 30-minute video call with the client. we made one first-article part within two days, shared close-up photos, and asked for confirmation before running the rest.

Client Feedback: “Having that first part photo check was super helpful—we didn’t expect it but really appreciated it.” 

Surface Finishes For Aerospace Parts

At Beska, we apply a list of surface finishes to improve the durability and surface finish of the custom aerospace parts.

ציפוי אבקה

ציפוי אבקה

זהו גימור משטח פופולרי לעיבוד חלקי מתכת, המציע עמידות, מראה מלוטש, עלות-יעילות וידידותיות לסביבה.

גימור אנודייז

אנודיזציה

זה כולל טבילת המתכת בתמיסת אלקטרוליט והפעלת זרם חשמלי, היוצר שכבת תחמוצת מגן על חלקי המתכת.

גימור ציפוי ניקל

ציפוי ניקל

זהו תהליך בשימוש נרחב הכולל הנחת שכבה דקה של ניקל על מצע, שיפור העמידות, העמידות בפני קורוזיה והמשיכה האסתטית של רכיבי מתכת שונים בעיבוד שבבי.

גימור התזת חול

התזת חול

זהו תהליך גימור משטח המשתמש באוויר בלחץ גבוה כדי להניע חלקיקי חול שוחקים על פני משטח, תוך הסרת זיהומים ביעילות, החלקת קצוות גסים ויצירת מרקם אחיד.

גימור ציפוי כרום

ציפוי כרום

זהו תהליך שמצפה משטח מתכת, בדרך כלל פלדה, בשכבה דקה של כרום באמצעות ציפוי אלקטרוני. ציפוי זה משפר את העמידות של חלק המתכת, עמידות בפני קורוזיה ומשיכה אסתטית.

גימור טיפול בחום

טיפול בחום

התהליך כולל חימום החומר לטמפרטורה מסוימת, החזקתו בטמפרטורה זו למשך תקופה מסוימת, ולאחר מכן קירורו בקצב מבוקר.

The Custom Aerospace Parts We Make

At Beska, we support aerospace engineers and supply chain teams with a wide range of custom components. Below are the common parts that we frequently manufacture for aerospace applications:

CNC Machining Parts (Aluminum 6061/7075, Stainless Steel, Engineering Plastics): Sensor housings, suspension brackets, gearbox covers, cooling channel blocks, motor housings, control lever arms, aircraft seat components (metal inserts), custom heat sinks, tooling jigs, and fixtures

Sheet Metal Fabrication Parts (Aluminum, Stainless Steel):
Avionics enclosures, shielding boxes, mounting plates, support arms, airflow deflectors, chassis frames, connector brackets, and structural covers.

Plastic Injection Molding Parts (ABS, PC, PA66, PEEK, PPS):
Insulation covers, air duct housings, light diffusers, connector shells, clips and fasteners, internal knobs and control interfaces, plastic enclosures, bracket spacers, and indicator panel frames.

Common Aerospace Parts We Make

Discover Our Aerospace Machining Services

אנו מספקים עיבוד שבבי CNC בדיוק גבוה, ייצור יריעות מתכת בהתאמה אישית וייצור הזרקה מהירה עבור אבות טיפוס וחלקים בהתאמה אישית.

שירות כרסום CNC-Beska Mould
שירות עיבוד שבבי CNC 5 צירים - Beska Mould

כרסום CNC 

עם צי של יותר מ-40 מכונות כרסום CNC, אנו מטפלים בחלקים מכל המורכבות. מעיצובים פשוטים ועד עיצובים מורכבים, אנו מספקים פתרונות חסכוניים.

פניית CNC 

בבסקה, יש לנו 8 סטים של מכונות חריטה CNC ו-5 סטים של מחרטות אוטומטיות המאפשרות לנו לייצר חלקים חרוטים באיכות גבוהה ביעילות. 

עיבוד CNC 5 צירים

באמצעות מכונות CNC מתקדמות של Mazak, אנו משיגים דיוק יוצא דופן בייצור חלקים מורכבים, עם סבולות של עד ±0.005 מ"מ. 

רכיבי מתכת
חלקי חיתוך לייזר של יריעות מתכת
חלקי מתכת

ריתוך פחים

ריתוך TIG/MIG מבטיח חיבורים חזקים ונקיים; שיטות חום נמוך ממזערות את סיכוני העיוות.

חיתוך בלייזר פחים

חותכי הלייזר המהירים שלנו יכולים להתמודד עם מגוון חומרים, החל מעודים דקים ועד ללוחות כבדים.

כיפוף מתכת

מכונות הכיפוף תואמות לפלדת אל-חלד, אלומיניום וסגסוגות מיוחדות.

תבניות הזרקה בהתאמה אישית
מהי הזרקת פלסטיק

כלי עבודה מהירים

לאחר קבלת קבצי הדו-ממד והתלת-ממד שלכם, המהנדסים שלנו ינתחו את העיצוב שלכם ויתאימו אישית את תבניות האלומיניום.

יציקת יתר

זה מבטיח קשר מושלם בין החומרים הבסיסיים לחומרים היצוקיים, ומספק מוצרים עם ביצועים מעולים.

הכנס דפוס 

אנו משלבים חומרים מרובים לתוך רכיב יחיד לשיפור הפונקציונליות והעמידות.

Populal Industries Served

Except for aerospace, we have been delivering custom parts to other popular industries like automotive, electronics, and medical.

שאלות נפוצות

To ensure the quality of the final parts, we provide full traceability documentation like material certifications, First Article Inspection Reports (FAIR), and CMM inspection report. 

At Beska, we often provide anodizing (Type II & III), passivation, alodine, sandblasting, and other custom coatings on aerospace parts.

Yes. At Beska, our engineers work early with R&D engineers in the design phase to optimize for material selection, machining feasibility, and cost-efficiency to meet the standard of the aerospace industry.

 

It's Time to Get An Aerospace Manufacturing Quote!

he_ILHebrew