Aluminum is widely used in Обработка на станках с ЧПУ, sheet metal fabrication, aerospace, automotive, electronics, and many other industries, but aluminum alloys are far from interchangeable. Grades such as 5052, 6061, 2024, and 7075 can differ significantly in strength, corrosion resistance, weldability, formability, and machining behavior.
These differences come from both alloy composition and material temper. Wrought aluminum alloys are grouped into series according to their main alloying systems, while cast aluminum uses a separate designation system. Knowing how these families differ makes it much easier to narrow down suitable materials for machining, forming, welding, surface finishing, and the final service environment.
1. What Is an Aluminum Alloy?
An aluminum alloy is a metallic material in which aluminum is the primary element, combined with elements such as copper, magnesium, manganese, silicon, or zinc to modify its properties.
Compared with commercially pure aluminum, alloyed grades can provide higher strength, improved machinability, better wear resistance, or different forming and corrosion characteristics. Their final properties depend not only on chemical composition but also on processes such as heat treatment and cold working.
2. How Aluminum Alloys Are Classified

Aluminum alloys are broadly divided into wrought alloys and cast alloys. Wrought alloys are produced by processes such as rolling, extrusion, forging, and drawing, while cast alloys are shaped by pouring molten aluminum into a mold. The two groups use different designation systems.
Wrought aluminum alloys use a four-digit numbering system. The first digit identifies the main alloy family, such as copper in the 2xxx series, magnesium in the 5xxx series, or magnesium and silicon in the 6xxx series. The remaining digits identify the individual alloy within that family.
Another important distinction is whether the alloy is heat treatable. The 1xxx, 3xxx, and 5xxx series are generally strengthened through cold working rather than precipitation heat treatment. The 2xxx, 6xxx, and 7xxx series can be strengthened through solution heat treatment and aging. The 4xxx and 8xxx series contain a wider range of compositions, so their heat-treatment behavior depends on the specific alloy.
This classification provides a useful starting point, but the alloy number alone does not define the final properties. Temper designation, product form, and processing history can significantly change strength, formability, residual stress, and machining behavior.
3. Types of Wrought Aluminum Alloys
1xxx Series: Commercially Pure Aluminum
The 1xxx series contains at least 99% aluminum. These grades offer excellent corrosion resistance, high electrical and thermal conductivity, and very good formability, but relatively low mechanical strength.
- Common grades: 1050, 1060, 1100
- Typical applications: Electrical conductors, chemical equipment, reflectors, signs, heat-exchanger components, and decorative products.
Because these alloys are soft and highly ductile, machining can produce long chips and built-up edge rather than the clean chip formation associated with some harder aluminum grades. They are generally selected for conductivity, corrosion resistance, or forming rather than high structural strength.
2xxx Series: Aluminum-Copper Alloys
The 2xxx series is primarily alloyed with copper. Many grades are heat treatable and offer high strength and good fatigue performance, which is why they are widely associated with aerospace and other highly loaded components.
- Common grades: 2014, 2024
- Typical applications: Aircraft structures, fittings, fasteners, gears, wheels, and high-strength machined components.
Grades such as 2024 machine well, but their corrosion resistance is generally lower than that of 5xxx and 6xxx alloys. Protective finishes or cladding may therefore be required in corrosive service.
Weldability varies by grade. 2024, for example, is generally not preferred for conventional fusion-welded structures, so welding requirements should be checked against the specific alloy rather than generalized across the entire 2xxx series.
3xxx Series: Aluminum-Manganese Alloys
The 3xxx series uses manganese as its main alloying addition. These alloys are non-heat-treatable and combine good corrosion resistance, formability, and moderate strength.
- Common grades: 3003, 3004
- Typical applications: Sheet metal parts, roofing, cookware, heat exchangers, chemical equipment, and architectural products.
Their ability to bend and form easily makes 3xxx alloys particularly useful for sheet fabrication. Strength is lower than that of the major heat-treatable series, so they are normally chosen where forming and corrosion resistance matter more than high structural loads.
4xxx Series: Aluminum-Silicon Alloys
The 4xxx series uses silicon as the principal alloying element. Silicon lowers the melting range and can improve fluidity and wear-related characteristics, depending on the grade.
- Common grades: 4032, 4043
- Typical applications: Welding filler material, brazing products, pistons, and selected automotive components.
Many 4xxx alloys are encountered more often in welding or specialized applications than as general CNC stock. Their mechanical and heat-treatment behavior varies considerably by grade, so the series should not be treated as a single uniform material group.
5xxx Series: Aluminum-Magnesium Alloys
The 5xxx series is primarily alloyed with magnesium. These non-heat-treatable alloys combine good strength, excellent corrosion resistance, and generally good weldability.
- Common grades: 5052, 5083, 5086
- Typical applications: Marine structures, fuel tanks, pressure vessels, transportation equipment, welded sheet assemblies, and formed components.
5052 is widely used for sheet parts that require forming and welding, while 5083 and 5086 are common in more demanding marine and welded structural applications.
For machining, the exact behavior depends on grade and temper. Softer 5xxx products may be more prone to chip-control and built-up-edge problems than harder machining-oriented aluminum grades.
6xxx Series: Aluminum-Magnesium-Silicon Alloys
The 6xxx series combines magnesium and silicon and is heat treatable. These alloys offer a useful balance of strength, corrosion resistance, weldability, extrudability, and machinability.
- Common grades: 6061, 6063, 6082
- Typical applications: Machine components, structural frames, housings, electronic enclosures, automotive parts, extrusions, and general industrial equipment.
6061 is one of the most widely used aluminum grades for CNC machining because it combines good machinability with useful mechanical properties and corrosion resistance. 6063 is more strongly associated with extrusion and architectural applications, while 6082 is widely used for structural components in many markets.
Machining performance still depends on temper, stock condition, tooling, and part geometry. For parts with heavy material removal or tight flatness requirements, a stress-relieved temper such as T651 may offer better dimensional stability than a standard T6 condition.
7xxx Series: Aluminum-Zinc Alloys
The 7xxx series is primarily alloyed with zinc, often together with magnesium and copper. These heat-treatable alloys include some of the highest-strength commercial aluminum grades.
- Common grades: 7050, 7075
- Typical applications: Aircraft structures, aerospace fittings, high-load mechanical parts, shafts, tooling components, and lightweight structural assemblies.
7075 offers substantially higher strength than 6061 and machines well for a high-strength aluminum alloy. Its main trade-offs are lower corrosion resistance and limited fusion weldability compared with many 5xxx and 6xxx alloys.
Residual-stress behavior also deserves attention when machining thin walls, deep pockets, or parts with high material removal. The actual distortion risk depends strongly on the product form and temper. Stress-relieved tempers such as T651 can improve dimensional stability, while T73 or T7351 conditions may be selected when improved stress-corrosion cracking resistance is required.
8xxx Series: Other Aluminum Alloy Systems
The 8xxx series covers aluminum alloys that do not fit into the major alloying families above. Their compositions and properties vary widely.
- Common examples: 8011 and aluminum-lithium alloys such as 8090
- Typical applications: Foil, packaging, electrical products, aerospace structures, and specialized engineering applications.
Because the 8xxx designation covers several different alloy systems, properties such as strength, heat treatability, corrosion resistance, and machinability should be evaluated by the specific grade rather than by the series alone.
4. Comparison of Common Wrought Aluminum Alloys
The table below compares four widely used wrought aluminum grades. Mechanical properties are typical values and can vary with product form, specification, and material condition.
| Свойство | 5052-H32 | 6061-T6 | 7075-T6 | 2024-T3 |
| Предел прочности | ~33 ksi | ~42–45 ksi | ~83 ksi | ~70 ksi |
| Предел текучести | ~28 ksi | ~35–40 ksi | ~73 ksi | ~50 ksi |
| Strengthening Method | Strain hardened | Precipitation hardened | Precipitation hardened | Solution heat treated, cold worked, and naturally aged |
| Коррозионная стойкость | Very good, including many marine environments | Good general corrosion resistance | Lower than 5xxx and 6xxx; stress-corrosion behavior depends on temper and service conditions | Lower than 5xxx and 6xxx; protective finishes are often used |
| Свариваемость | Очень хороший | Good for many fabrication methods | Limited for conventional fusion welding | Limited for conventional fusion welding |
| Machining Behavior | Moderate; softer tempers may produce difficult chips | Good and widely used for CNC machining | Good for a high-strength aluminum alloy | Хороший |
| Формуемость | Хороший | Moderate in T6 condition | Limited to moderate in T6 condition | Умеренный |
| Relative Material Cost | Lower to moderate | Умеренный | Выше | Выше |
Values are typical rather than specification limits. Actual properties and pricing vary with temper, product form, supplier, quantity, and applicable material standard.
5052-H32 stands out for formability, weldability, and corrosion resistance, while 6061-T6 offers a broad balance of mechanical performance and manufacturability. 2024-T3 and 7075-T6 provide substantially higher strength, but both require more attention to corrosion protection and fabrication method.
5. Aluminum Alloy Selection for CNC Machining
For CNC machining, alloy selection affects more than strength. Temper, dimensional stability, corrosion resistance, finishing requirements, and any forming or welding operations can also influence the final choice.
| Приложение | Common Alloy Options | Why They Are Commonly Considered |
| General CNC housings and enclosures | 6061-T6 / T651 | Good combination of machinability, strength, corrosion resistance, and anodizing response |
| Precision machined plates and structural parts | 6061-T651 / 7075-T651 | 6061 for general-purpose parts; 7075 where substantially higher strength is required |
| Sheet metal brackets and formed parts | 5052-H32 | Good formability, weldability, and corrosion resistance |
| High-strength machined components | 7075-T6 / T651, 2024-T3 | Higher mechanical strength than 6061, with additional corrosion and fabrication considerations |
| Heat sinks and extruded profiles | 6063 / 6061 | 6063 is widely associated with extrusion and surface finish; 6061 is common where more machining and strength are required |
| Aerospace structural components | 2024-T3, 7075-T6 / T651 | Both are established high-strength options, but the actual grade and temper depend on the design specification and service environment |
6061 is a common starting point for many machined aluminum components because it combines useful strength, corrosion resistance, and machining performance without the higher strength and material cost of 7075. That does not make it the default for every CNC part.
Where forming and welding are more important, 5052 may be more suitable. Where strength becomes the primary requirement, 2024 or 7075 may be considered, provided their corrosion behavior, temper, joining method, and service requirements are compatible with the design.
6. Common Aluminum Temper Designations
The alloy number identifies the chemical composition, while the temper designation describes the material condition created by термическая обработка, cold working, or stress relief. The same alloy can therefore have significantly different strength, ductility, and dimensional stability depending on its temper.
- O temper: The material is annealed, giving it relatively low strength and high ductility. This condition is commonly used where extensive forming is required.
- H32 temper: Used with non-heat-treatable alloys such as 5052, H32 indicates that the material has been strain hardened and then stabilized. It provides higher strength than the annealed condition while retaining useful formability.
- T4 temper: The alloy is solution heat treated and naturally aged. It generally offers lower strength but better formability than the same alloy in the T6 condition.
- T6 temper: The alloy is solution heat treated and artificially aged to achieve higher strength. The trade-off is reduced ductility and formability compared with softer tempers such as O or T4.
- T651 temper: This condition starts with the T6 heat treatment and adds controlled stretching to relieve residual stress. It is commonly used for plate and other products where dimensional stability during machining is important.
Temper selection should match both the alloy and the manufacturing process. For example, 5052-H32 is common for formed sheet components, while 6061-T651 is often useful for machined plate where distortion control matters. Parts that require substantial forming may instead be processed in a softer condition before reaching their final temper.
7. Common Cast Aluminum Alloys: A356 and A380
Cast aluminum alloys use a different designation system from wrought alloys and are selected partly according to the casting process. Two widely used examples are A356 and A380.
A356
A356 is an aluminum-silicon-magnesium casting alloy containing roughly 6.5–7.5% silicon. It offers a useful combination of castability, corrosion resistance, and mechanical properties, and it can be strengthened through heat treatment such as the T6 temper.
A356 is commonly used for sand castings, permanent-mold castings, and other applications where good mechanical performance and corrosion resistance are important.
A380
A380 is an aluminum-silicon-copper alloy widely used for high-pressure die casting. Its silicon content supports good fluidity during casting, while copper contributes to strength but generally reduces corrosion resistance compared with lower-copper casting alloys.
Typical applications include housings, brackets, enclosures, automotive components, and other complex die-cast parts produced in higher volumes.
| Casting Alloy | Common Process | Термическая обработка | Main Advantages | Key Considerations |
| A356 | Sand casting, permanent mold | Commonly used in T6 condition | Good corrosion resistance and mechanical properties | Final properties depend strongly on casting quality and heat treatment |
| A380 | High-pressure die casting | Usually used as-cast | Good castability and suitable for complex, high-volume parts | Higher copper content reduces corrosion resistance; porosity may affect some applications |
A356 is commonly considered when mechanical properties, corrosion resistance, and heat treatment are important. A380 is more closely associated with high-volume die casting where complex geometry and efficient mold filling are priorities.
8. Common Manufacturing Considerations Across Aluminum Alloys
Different aluminum alloys can behave quite differently during machining. Alloy composition, temper, product form, part geometry, and material condition all influence chip control, dimensional stability, surface finish, and distortion.
- Built-up edge. Softer and more ductile aluminum alloys can adhere to the cutting edge, affecting surface finish and dimensional consistency. Sharp tooling, suitable cutting geometry, and effective chip removal help reduce this problem.
- Chip control. Chip shape varies with alloy, temper, tooling, feed, and cutting speed. More ductile grades may produce longer chips, while harder alloys can break chips more readily under suitable cutting conditions. Chip behavior should therefore be managed through tooling and cutting parameters rather than assumed from alloy grade alone.
- Thermal expansion. Aluminum has a relatively high coefficient of thermal expansion. For example, a 300 mm aluminum part with a coefficient near 23 µm/(m·°C) can change by roughly 0.07 mm with a 10°C temperature increase. For tight-tolerance parts, machining and inspection temperatures should be controlled or allowed to stabilize before final measurement.
- Residual stress and distortion. Rolled, extruded, or heat-treated aluminum products may retain residual stresses depending on the alloy, temper, and manufacturing history. Heavy material removal can release these stresses and cause thin walls, large plates, or asymmetric parts to move. Stress-relieved tempers such as T651 can be useful when dimensional stability is important.
- Corrosion considerations. High-strength alloys such as 2024 and 7075 generally require more attention to corrosion protection than 5xxx or 6xxx grades. Depending on the service environment, anodizing, cladding, conversion coating, painting, or another protective finish may be specified.
Заключение
Aluminum alloy selection starts with more than the series number. 5052 is widely used where forming, welding, and corrosion resistance are important, while 6061 offers a versatile combination of strength, machinability, and corrosion resistance for many general machined components. 2024 and 7075 provide higher strength for more demanding applications, but they also require closer attention to corrosion protection, joining methods, and temper.
The temper and product form can be just as important as the alloy itself. A 6061-T651 plate, 5052-H32 sheet, and 7075-T6 bar may behave very differently during machining or fabrication even though all are aluminum alloys. For CNC projects, defining the alloy and temper on the drawing helps align material properties, machining strategy, and final part performance.
Still comparing aluminum grades for your CNC part? Send Beska your drawing and project requirements. We can review the alloy, temper, machining needs, and critical tolerances with you before production starts.
Часто задаваемые вопросы
6061, 7075, and 2024 are all commonly machined aluminum alloys. 6061 offers a broad balance of strength, corrosion resistance, and machinability, while 7075 and 2024 are often considered when higher strength is required.
There is no single lowest-cost option because material price varies by grade, temper, product form, and supplier. For many general CNC parts, 6061 is widely used because it combines reasonable material cost with good machining performance and useful mechanical properties.
Yes. 6061 is widely used for precision-machined components, especially when supplied in stress-relieved conditions such as T651 plate. Dimensional stability still depends on part geometry, stock condition, machining sequence, and process control.
Yes. In comparable high-strength tempers, 7075 provides substantially higher tensile and yield strength than 6061. The trade-offs include lower corrosion resistance and more limited weldability.

