Umspritzservice
Why Choose Beska?
At Beska, we offer a custom overmolding service according to your 2D & 3D files. Do you need any help? We’d like to assist!
Materialoptionen
We support 100+ kinds of materials for your overmolding projects, ranging from thermoplastics to elastomers. If you get any demand, we would customize it for your project.
Engineering Guidance
Hesitating to make a decision on the right material? We’ve got you covered. Our engineering team is willing to offer suggestions on design, material selection, and other problems.
Kurze Vorlaufzeit
We’re fully equipped to offer a custom overmolding solution from molding to delivery. With well-managed schedules and professionals, we’re capable of delivering the parts as estimated.
Anwendbare Materialien für das Umspritzen
We usually combine 2+ kinds of materials to create overmolded parts. There are a few materials that we often apply for overmolding.
Substrate Materials:
Nylon (PA)
Acrylnitril-Butadien-Styrol (ABS)
Polycarbonat (PC)
Polypropylen (PP)
Polyethylen (PE)
Glass-reinforced plastics
Soft Overmolding Materials:
Thermoplastic Elastomers (TPEs)
Thermoplastic Polyurethanes (TPUs)
Silikonkautschuk
Polyvinylchlorid (PVC)
Was ist Umspritzen?
As one of the plastic injection molding techniques, overmolding is a two-step molding process. We usually apply a soft, flexible material like silicone to be molded over a rigid plastic base like ABS. This process is used to create parts with enhanced grip, added comfort, and protected surfaces. Or we just used to combine multiple functions into one part.

Step 1: Create the Base
We start by making the hard inner component, which is also called the substrate. This substrate is usually produced using a standard injection molding process and works as the foundation of the component. For example, a tool handle to an electronic shell.
Step 2: Overmold the Soft Layer
After the base is molded and cooled, it’s carefully placed into a second mold. Then, we would inject a softer material over or around specific areas. The process doesn’s need adhesive. Heat and pressure help the materials fuse together, either through a mechanical lock or a chemical bond.
The result is a clean, durable, and ergonomic plastic product. This overmolding process is widely used in various industries where both function and feel matter.
Perfektionieren Sie Ihre Umspritzen Bedürfnisse mit uns
Merkmale des Umspritzens
Materialverträglichkeit
Präzise Schichthaftung
Kundenspezifischer Formenbau
Overmolding VS Insert Molding
Overmolding and insert molding are two plastic injection molding techniques that we applied to combine materials in one part. But they serve different purposes. Let’s see their difference!

In the overmolding process, we mold a soft material like silicone or rubber over a rigid plastic base. The silicone overmolding parts are commonly for medical grips; rubber overmolding parts are often applied for tool handles. They improve the grip, comfort, or sealing of the parts. We also apply it in creating plastic overmolding parts where aesthetics or vibration dampening is key.
As for insert molding, it starts by placing a pre-made metal or plastic component (like a threaded insert or a pin) into the mold before injecting plastic around it. The integration makes a strong mechanical bond. It is widely used in electronics, such as overmolded connectors, where the insert remains functional and protected inside the plastic shell.
So, how to choose from them? If you want enhanced grip or dual-material function, overmolding is your top choice. If you’re looking to integrate structural or conductive inserts, insert molding is the better choice.
Definition von Umspritzen
Vorteile des Umspritzens
Verbesserte Produkthaltbarkeit
Verbesserte Benutzererfahrung
Erhöhte Designflexibilität
Arten von Umspritzservices
Umspritzen von Einsätzen
Zweikomponenten-Umspritzung
Mehrmaterial-Umspritzen
Anwendung von Overmolding-Diensten
Unterhaltungselektronik
Medizinische Geräte
Automobilkomponenten

3 Tipps zur Auswahl von Umspritzdiensten
#1 Solide Erfolgsbilanz
#2 Nachgewiesene technische Expertise
#3 Fortgeschrittene Umspritztechniken
We usually don't. That's because overmolding works well when we choose the soft overmold and rigid base that are chemically or mechanically compatible. But if using the same materials, they may not bond well.
The alternatives include two-shot molding, adhesive bonding, or mechanical assembly. These manufacturing methods may work when the overmolding process isn't ideal for your material or budget.
It depends. It's expensive if you create low-volume plastic parts for its high tooling costs. If looking for high-volume production solution, overmolding is often a more cost-effective one in the long run.
1. Remenber to leave room for proper material flow.
2. Add undercuts or texture for better bonding.
3. You need to ensure the base material can handle the heat and pressure of the second molding cycle.
TPE and silicone are popular materials for rubber overmolding. They are ideal for producing handheld products and seals.
Overmolding is one of the popuar injection molding techniques. But they are not the same. Injection molding usually refers to making a single part in one cycle. Overmolding is a technique that builds a multi-material part in two or more steps by molding over a preformed piece.
Tauchen Sie tiefer in unsere Ressourcen ein
Suchen Sie nach vielfältigeren Serviceoptionen? Stöbern Sie durch unsere handverlesene Auswahl:
Haben Sie noch nicht gefunden, wonach Sie suchen? Zögern Sie nicht, Kontaktieren Sie unsWir sind rund um die Uhr für Sie da und helfen Ihnen gerne weiter.
